Question about Samsung Office Equipment & Supplies

1 Answer

How to reset replace pickup roller on samsung 3320

Posted by naser erfani on


1 Answer

Adorjani Laszlo

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Samsung Master
  • 1,316 Answers

In mantenance menu select total CNT clear,

Posted on Mar 31, 2019


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I get paper to feed thru my Samsung ML-1210 Laser Printer?

This model is old and may have aging defect for the friction pad and pick up roller.
You may kindly replace the above part for assurance of paper pickup. the paper is stacked vertically on the top from the back side pocket..
However the the pickup roller may be cleaned using a dampened cloth for temporary.


Feb 21, 2015 | Samsung Office Equipment & Supplies

2 Answers

I need to clean the solenoid on samsung 4521f printer (the Pickup Roller is turning over and over without stopping) how do i Exactly disassemble the printer and do it ? thanks in advance

stop the video at 1.44 and you can see the paper feed solenoid in the center of the picture with the white wires running from it.

sorry about the music you may want to mute it

Dec 11, 2014 | Samsung Office Equipment & Supplies

1 Answer

How to replace pickup rollers

This should help. Good luck !

Cassette (Tray 2) paper pickup and feed rollers

To remove the paper pickup and feed rollers

1 Remove the cassette.

2 Locate the two rollers on the bottom of the paper pickup unit (above the cassette). The pickup

roller is the smaller roller, and the feed roller is the larger roller.

3 Pinch the tab on the end of the cassette pickup roller (callout 1), and pull the roller out.

4 Pinch the tab on the end of the cassette feed roller (callout 2), and pull the roller out.

Figure 6-24 Removing the cassette pickup and feed rollers

Note Always replace the cassette pickup roller and the cassette feed rollers at the same time. Also replace
the separation roller (located in the paper cassette) when replacing these rollers

Aug 14, 2014 | HP Color LaserJet 4600n Printer

1 Answer

Pickup roller

search trought service manual and see service menu for reset counter for pickup roller

Feb 03, 2014 | Samsung CLX6220FX COLMON MFC Printer

2 Answers

Pickup roller fails to load paper sometimes from the paper tray.

Pickup rollers suffer from several possible faults- - Cheap paper can lose fibers that clog the roller reducing friction - Rollers can harden, reducing their 'stickiness' - The slightly roughened surface of the roller loses its roughness
Sometimes the roller will improve with cleaning but don't use alcohol since this will leach softeners from the roller so a mild detergent is better such as window cleaner and a fiber-free cloth; you don't want to worsen the problem. Some mfr.s (HP for one) have produced short-lived rollers that required 'roughening' pads and a small program to drive the roller for seconds to minutes to restore the minute 'fingers' to the roller. If a high-usage printer, you may have to replace the pickup roller and the labor involved varies greatly.
One 'quick and dirty' method that sometimes works is to reset the paper length to 'legal' (runs longer) and put a good quality paper sheet that has been wetted with window cleaner in the feed slot and allow the roller to rotate on that surface by holding the end of the sheet. The printer will eventually error out with a 'misfeed' that may require resetting. Allow it to dry again before trying to print.

Feb 15, 2010 | Samsung SCX 4200 All-In-One Laser Printer

1 Answer

My printer was giving me a jam message when it had


It is the pickup roller that courses this isasue. remove yr try u will be able to find the pickup roller right at the end near the back door cover. remove it and turn the rubber. sometime this will help. or replace the pickup roller.

Jan 17, 2010 | Samsung CLP 300 Laser Printer

1 Answer

Paper won't feed

Cleaned the pickup roller (pull out the toner cartridge - it's the large 1" wide roller at the back) with a little 91% isopropyl alcohol ($2.50 at the drug store), The printer feeds perfectly now.
If this didn't work, then Samsung tech support suggested replacing the pickup roller assembly which is available at ($6.95) along with a service manual ($28). But, fortunately, it wasn't necessary.

Dec 24, 2009 | Samsung SCX-4725FN All-In-One Laser...

1 Answer

Looking for repair of Samsung SCX-4016 multifunction printer/copier/fax/scanner

You can buy Toshiba 2060 or hp laserjet 1100 pickup roller rubber.and assembling need 10 $ only 3$.

Feb 28, 2008 | Samsung SCX-4016 Laser Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

376 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Cindy Wells

Level 3 Expert

6220 Answers

The Knight
The Knight

Level 3 Expert

76466 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides