Question about LG Microwave Ovens

Open Question

I don't have a template to mount my LG LMV1831st microwave. Are the dimensions available somewhere online?

Posted by Gary Bute on

Ad

5 Related Answers

MicrowaveSvc

William Miller

  • 9179 Answers

SOURCE: where can I find the paper template for wall

You may be able to download the installation instructions from the Sears parts site.

Just enter your full model number there.

A full Sears/Kenmore model number has 3 digits, a dot, then 8 more digits, such as ###.########
On the resulting page, look to the right for the blue "View manuals" button. Click there.

439cb0b.jpg

That Sears-related site has many free manuals. While the manuals they list there are all free, they will ask you to register.

Many times, the owner's manual will also have the installation instructions inside.

If yours is not listed there for free, or does not contain the template, you would have to order it through the
Sears parts site.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Posted on Sep 11, 2009

Testimonial: "The part I need has been discontinued and the Sear's website confirmed that it is not available any longer."

Ad
MicrowaveSvc

William Miller

  • 9179 Answers

SOURCE: wall template mount for ge profile microwave

You can may be able to order that by looking up parts by your full model number here.

Posted on Jan 11, 2010

Ad

Henry Leunissen

  • 142 Answers

SOURCE: Hi there, I'm installing an LG LMV205SW OTR

It does not really matter where you can get a lag screw into a stud as long as you can get at least two screws in place holding the mounting plate. Don't forget there are two screws in the front you have to put in.

Posted on Sep 27, 2011

ercupa190

ernesto cuadra

  • 12223 Answers

SOURCE: Need Installation 'Paper' Template for MMV4184AAW Maytag Microwave

see the video

and proceed according. God bless you

Posted on Apr 02, 2013

charles chandler

  • 530 Answers

SOURCE: i need back and top template for lg microwave LMV2053ST. Instructions do not give measurements only refer to template which I do not have

Probably going to have to make one

Posted on Feb 18, 2015

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Over range microwave doesn't fit in the space outlined by the installation template


You missed something while reading the installation directions but that won't fix it. since you already drilled holes in the wall lower the mount down as needed then drill new holes in the mount to match the holes you drilled in the wall. The problem would have been worse if you were off left or right... up and down is easier. Remember you maybe just not dropping the microwave low enough to fit in the slot at the bottom of the wall mount before you tilt the micro up.. check it one more time...including the directions before you re-drill

Sep 26, 2015 | Bosch 30" 500 Series Over-The-Range...

1 Answer

I'm installing a GE spacemaker JVM130K but don't have the mounting templates where can I find them?


I checked the manual and it did not provide one or mounting dimensions. If you already have the unit, reverse engineer a template... You can either do it by holding paper to the sides and marking the mounting points, or simply take the measurements for the mounting points from a good known reference - such as the front if you are looking to moun the front flush to the face of the cabinets.

Dec 04, 2014 | Microwave Ovens

1 Answer

I want to install a new microwave over the counter microwave that uses the existing mounting screws, vents, template and whatever. I don't want to have to do anything but disconnect and remove the old


you must ask to the supplier for the dimension and based in the models specifications. Contact them via ONLINE chat and get the support for better performance.
God bless you

Nov 18, 2013 | Microwave Ovens

1 Answer

Over The rang microwave installation


I would say finish the wall, because the microwave needs the space for cooling.

Dec 17, 2017 | Samsung Microwave Ovens

1 Answer

Wall template mount for ge profile microwave


You can may be able to order that by looking up parts by your full model number here.

Jan 10, 2010 | GE Profile Over-the-Range Microwave

2 Answers

Hi there, I'm installing an LG LMV205SW OTR Microwave and the four holes for the mounting plate do not coincide with the two wall studs that are behind the microwave location. Can I sink a couple of extra...


Consider the studs as I I add 2 2x4's like in an H with second 2x4 below the cenre bar in the H adjust both to the spaces needed for your mounting crews if it came with a template use it....I am not a carpenter but It Is what I would do

Dec 29, 2009 | LG LMV2083SW Microwave Oven

1 Answer

When installing over the range microwave does template need to be removed


the paper template that they send to mark for mounting instructions? yes...another template you're refering to?

Oct 25, 2009 | Bosch Microwave Ovens

1 Answer

LG LMV1680BB top mount not usable


They simply need to drill new holes, I'd say.

The installation instructions will have a template.

Jun 05, 2009 | Microwave Ovens

Not finding what you are looking for?
Microwave Ovens Logo

Related Topics:

528 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Microwave Ovens Experts

Cindy Wells

Level 3 Expert

6222 Answers

Sheldon Dedek

Level 3 Expert

912 Answers

Randy Schumann
Randy Schumann

Level 2 Expert

410 Answers

Are you a LG Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...