Question about Mitsubishi Televison & Video

Open Question

I replaced main board on Mitsubishi LT-52244. Picture looks great, but I have no sound. Help.

Go into input and source if ok check audio see if speakers on

Posted by Terry Foster on

Ad

5 Related Answers

Anonymous

  • 1 Answer

SOURCE: everything works- except sound

Everything works except the sound. It just quit. Does this sound familiar?

Posted on Sep 03, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: need help repairing Mitsubishi VS 4541 rear projection TV

i have a mitsubishi vs 4541 projection tv, with no picture, just sound

Posted on Sep 22, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: wd-62825 mitsubishi dlp tv

Had the same problem. Service replaced the lamp engine. It did help.

Posted on Jan 28, 2009

Jack South

  • 195 Answers

SOURCE: sharp LC 42D62U has sound no picture

Most likely the CCFL inverter is bad.

Posted on Oct 10, 2009

toddthetvmd

Todd Thornton

  • 101 Answers

SOURCE: i have picture but no sound on my 42 inch vizio

If you received a remanufactured board it might be defective,Or did you forget to hook back up the speakers? Sounds dumb but happens alot. Speaker wires get in the way,we disconnect them to look at a board or replace one.Often gets over looked.But I have received several defective boards.Hope this helps. Toddthetvmd

Posted on Oct 26, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

LCD TV diplays blue screen on all inputs

Hi,
Nothing on all inputs would suggest the Main AV board not processing signals, if all other functions such as volume, menu access, on and off operate normally the power supply board is probably functioning OK. Have a look at shop jimmy for an idea on price and availability for Mitsubishi LT-46144 Boards and spare parts:

TV Parts Universal TV Stands DLP Chips ShopJimmy
1helpful
2answers

I have a samsung lcd tv that powers on has sound but the picture is fuzzy and has no colour . What would be the component that needs replacing for this ??

Hello. Before you start replacing parts, make sure your connections are correct. It sounds like you have connected a composite source to a component input. Composite is three RCA plugs, a yellow for all of the video, and a red and white for audio left and right channels. Component is five RCA cables, green, red and blue for video, and red and white for audio. if composite is connected to a component input, the picture will be black and white with squiggly lines all through it.
0helpful
1answer

Continuous Blue Light Flashing, Mistubishi LT-52244

Try unplugging for 1 minute, then plug back in again. It appears that the unit is initializing, if it continues in that mode you may need the DM PCB

part# 921C549008

see the following website:

http://www.shopjimmy.com/catalogsearch/result/?q=921C549008
0helpful
1answer

Mitsubishi LT-46249 picture is completly green. How do i correct this?

First check all input cables, make sure all cables are good & plugged in fully. then check with a DVD player to all HDMI & component inputs. if none of this solves issue you may need MAIN PCB.
PT# 934C335007 $139.99
http://www.tvpartsguy.com/servlet/Categories
0helpful
2answers

Sony bravia model kdl-46z4100 has no sound. picture is ok.

Tries tv unplug,replug it back about an hour later for the tv for a resetting back to the factory setting.Go into the tv menu go to Audio Setting go down to do a resetting back to factory setting.These steps will help the tv to get the tv audio back.
1helpful
1answer

Sound works no picture

The most likely the TV has a power supply related problem. The most common thing to go out is the circuit board that supply power to the screen. Commonly called a Backlight Inverter Board.
I can't say it's 100% the problem because I can't actually look at the tv over the internet.
If the TV is still under warranty, go that route.
If not under warranty and If you have some electronic experience, you can purchase a Service Manual over the internet and diagnose the source of the problem and fix it by soldering in the new part. The Service Manual will give you circuit diagrams, test points, and part# lists. Usually, cost under $20.

I hope I shed some light on the subject for you.
0helpful
1answer

Mitsubishi Vs-6071 Picture

replace the signal board (one with all the rca's on it) and not the main board if a plain antenna works OK
Not finding what you are looking for?
Televison & Video Logo

Related Topics:

77 views

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76823 Answers

Ekse

Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6394 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...