SOURCE: Maytag Dishwash - No lights will light up on the control panel
first off ck the breakers ofr tripped breaker, next remove lower acess panel and on right side is main wire connection remove box cover and make sure connection is good. ck fro 110 v there if not you got an electrical issue. next would be to check the door switch assy's.
SOURCE: Whirlpool GU2500XTP dishwasher went dead in mid-cycle.
"Wondering if this model has had reliability issues with the circuit card." ...If by circuit card you mean the electronic control board, that part number is used in many other models as well. In my experience with these control boards, I believe they have a low failure rate.
Make these checks if you haven't done so yet...
Check for 120V (breaker). Look for loose/shorted wiring connection at the
dishwasher's junction box. Check all wiring connections to the control panel, electronic control and thermal fuse. Test the continuity of the thermal fuse (part # 8193762). If that's ok, you have already replaced the control panel so the problem is likely with the electronic control board (part # 8564546).
Good luck.
SOURCE: Whirlpool GU1500 XTLS Dishwasher, need control panel part number
Just go to this site and you will find the part you are looking for.
http://tiny.cc/z5Sy6
Testimonial: "Love that he told me what part he thinks it is but why is ther 3 different parts that look exactly the same on this page he sent me to. Very Confusing"
217 views
Usually answered in minutes!
×