Computers & Internet Logo

Related Topics:

Question about Casio Computers & Internet

Open Question

I can't get my best Casio wk1800 to come on when I got it 2wedks ago it worked great now it won't power on I did disassemble it and alot of the solder contacts are like corroded is this the problem if so how to remedy this ?

Posted by Steven Taylor on

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

IT SEEMS NOT TO BE GETTING POWER.

Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time.
0helpful
1answer

Hi, I haven't used my Casio since about two years

Casio is a manufacturing company; you do not say what the device is. If it is run by battery perhaps it has died and needs re charging. Or even if it is dead, a new battery. But Casio what?
1helpful
1answer

My LG GC900f's camera suddenly won't work. I last used the camera three days ago and it was great, but when I tried it earlier, it just won't open. Even the apps that need the camera, won&

Don't take it to any normal technician. Go to Authorized service of LG and get it done. It is not any software issue, i think it is hardware problem.



Performance Chip
0helpful
2answers

Yamaha CVP-3 piano won't turn on anymore!

those pianos work forever probably the power cord.
0helpful
1answer

I purchased a 550 series mower last year. It worked great. I used it a week ago and it worked great. Took it out today and it starts right up but won't run for morethan 5 seconds....starts right up...

Hi, remove the bowl off the bottom of the carby and clean it out. My best guess at this stage is that you have water in the bowl. Hope this helps, regards Phil.
2helpful
2answers

My adaptor use to work fine now it wont work I found out it was the piece on the back where the adaptor plugs into, If I jiggle it and move it sometimes the power light will come on but it works fine with...

You can get that fixed if you can find someone who can solder. The jacks wear out over time on a lot of things. The jacks themselves are worth about $1 but it is the labour to open the case and solder a new one in.

The contacts in the jacks are spring loaded so these can wear or get damaged etc. So eventually they won;t make good contact and you get your problem. You see this a lot on laptops. You can twist or apply pressure on the plug until you get it to power up. This is more luck than anything when it works and eventually it will get to a point where it won;t connect anymore. This really is a simple repair but finding someone to solder the new jack in is the problem.
2helpful
2answers
0helpful
1answer
Not finding what you are looking for?

115 views

Ask a Question

Usually answered in minutes!

Top Casio Computers & Internet Experts

Steve Nordquist
Steve Nordquist

Level 3 Expert

982 Answers

Cindy Wells

Level 3 Expert

6611 Answers

Marvin
Marvin

Level 3 Expert

85242 Answers

Are you a Casio Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...