Question about Kenwood Food Mixers
SOURCE: Kenwood chef 700w
I hope you didn't buy a new one, ours stopped last week after 25 years. All that was needed were new brushes for the motor. Anyone with a screwdriver could replace them. 4Kenwood had the parts to me in a couple of days.
Posted on May 31, 2008
I have the spare part number for the bowl.
KW638821 - bowl - polished - stainless steel
KW672487 - with handles bowl - mirror finish
try to find a store near you to get one.
Posted on Jul 12, 2008
If the attachments that you are talking about are the dough hook and the whip, then the red lever is not used to put them in or take them out. The red lever releases the plastic housing on the end of the mixer, which then exposes the mounting hole for the major attachments such as the grinder, sausage maker, etc. You push the red plastic lever, then gently pull off the plastic end of the mixer. It should come off with absolutely no force. Then insert your food grinder or other attachment with the red lever held back. Once the cog on the grinder is aligned with the fitting inside the hole, release the red lever so that the recessed hole on the grinder will become engaged. The Kitchenaid classic stand mixer and the Viking stand mixer have essentially the same set up.
Posted on Jul 10, 2010
Tips for a great answer:
May 29, 2016 | Kenwood Food Mixers
Jan 11, 2015 | Kenwood Food Mixers
Mar 18, 2013 | Food Mixers
May 13, 2012 | Kenwood Chef/major Mixer Clear Splashguard...
May 06, 2009 | Kenwood KM300 Chef Stand Mixer
Apr 15, 2008 | Kenwood KM300 Chef Stand Mixer
189 people viewed this question
Usually answered in minutes!