SOURCE: DP-1820E - Contact Your Dealer - Printer Error E02-01
E02-01 refers to the tray 1 lift motor either you have a bad motor or there's a problem with your main board. good luck
SOURCE: E02 error message - remove and reattach battery
Read what Juan Carrera wrote about this problem.
http://bellsouthpwp2.net/j/u/juancarrera/JVC/JVC%20Camcorder%20Errors.htm
SOURCE: Risograph GR 1700 E02
check the Paper Feed Tray.. is there something in the way? does it go up and down? if it is all the way up or down maybe it got pushed off the rail?
SOURCE: hotpoint ultima. recently changed belt but now
Hiya,
F02 is a motor related fault, the correct terminolagy is; motor tacho open/short circuit, check motor/wiring and connections.
The most common reason for this is a bad connection or broken wire or last resort, module.
Remove the lower back panel and you will see the motor wires (white plug) there will be 7 wires, 2 of which are red or black, pull gently on the wires at the motor end, you will probable find one of the red/black wires will come off...
If they are all tight, check the external wires in the motor especially the ones that go to the rear of the motor (tacho) inspect those wires for damage..
Another common one is where the wires plug into the motor, this plastic holder sometimes comes loose and hangs from the motor, if this is the case, secure it back to the motor.
Hope this helps, Please rate my help. Thanks
Regards
Sussex engineer
SOURCE: How to solve Error Code E02 always appear
Error Code E02 means paper jam.
Solution
1. Unplug the power cord and USB cable.
2. Lift the printer upside down, then shake the printer.
3. This is done, to remove foreign objects, which get into the roller.
Causes of damage
Solution
3,874 views
Usually answered in minutes!
×