I have a trotter cxtplus I got an err code 2 can you tell me what that is

Question edited for clarity.
Question moved from Washing Machines category.

Cybex International Inc. Recalls Treadmills Previously ...

U.S. Consumer Product Safety Commission (.gov) https://www.cpsc.gov > Recalls > cybex-international-i...
Description: This recall involves the treadmills "Cybex 400T," "Cybex 410T," "Trotter 510," "Trotter 525", "Trotter 535", and "CXT+" that were recalled ...

The number is at the bottom of the Recall information.

Some have a breaker, but looking for it shows me that it has a separate power supply. You need to test components with a Multimeter.

https://www.google.com/search?q=Trotter+510+breaker

..

I don't know if this will help, here's a link for the manual for the 700 model.
Good luck http://www.sportsmith.net/images/product_support/trotter/manuals/cybex700ttreadmillownerandsvcmanual.pdf

unplug it then leave it unplugged then you won't see that error message.
Terry

adjust the reed switch, test for open or faulty, clean it, and tight the connector fery weel , see the diagram attached
2) replace the batteries old by new ones, and clean the contacts batteries.
3) tight the ribbon cables for keypads, clean it too.
God bless you

I've never heard of it.
Do you have the actual code number ?

* 2 8 * ( service mode )
COPIER
FUNCTION
CLEAR
ERR
OK

Turn off and on

If does not helps replace fixing film assy

visit wefixfitnessequipment.com and I will tell you how to flip the deck, tighten the belt and where to get lube. If you are planning on flipping the deck make sure you lube it with the right kind of lube!

B. Clark
Trotter/Cybex certified technician
15 years exp.

An ERR 2 may be cleared by a simple reset of the coffee maker. This means unplugging the unit and plugging it back in. When powered back on, select a brew function to see if the error reappears.

If the code does reappear, ERR 2 indicates an internal error with the computer of the warming plate. This may be covered under Kitchenaid's 1 Year Hassle Free Warranty. I would advise you to call Kitchenaid Customer Service to see what options are available to you. Repair is not recommended, as it is not cost effective for the company or the consumer.

Their toll-free telephone number is 1-800-541-6390.

turn key to <acc> turn radio will blink err. leave on for at least half hour.err will be replaced by enter code.

Ok the washer is telling you we have a problem. I will tell you how to retrieve the code and then ill tell you what that code means
1. Wake the washer by pressing any button.
2. Wait 5 seconds.
3. Press and HOLD the Start/Pause and Cancel
buttons simultaneously. As long as the buttons are
held, the failure code will appear in the display as an
E followed by two numbers, a number and a letter or
two letters. The controlwill beep and the Door Lock,
Wash, Rinse, and Final Spin indicator lights will
flash.