No dial tone when you pick up the phone so you cant call out and when someone rings in it rings but when you press the button to answer it the dial tone is there but its ringing still.
phone type. all line work with 2 wires tip and ring so if u have 1 line 1 pair (2wire) 2 line (4wire)your jacks need to be wired that way also..phone type. all line work with 2 wires tip and ring so if u have 1 line 1 pair (2wire) 2 line (4wire)your jacks need to be wired that way also..
You can't post conmments that contain an email address.
It sounds as though your set is not programmed with a line appearance. and line preference is not set, this can be set for intercom, or a line or nothing when you pick up the phone. You can do a pick up code to answer until an appearance is programmed on your set.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Intercom button/s provide dial tone when they are pressed. They are required to call other phones on your system. Sounds like your button is stuck or issue with the motherboard.
If your printer is connected to a modem make sure that the port has a dial tone. To check for dial tone, try to plug in a phone to the same port that you printer is connected to. If it doesn't have dial tone, you might want to check with your phone provider. Or you can plug in the printer straight to a wall jack.
Once the printer is connected to a line that has dial tone, you can then setup the printer to receive faxes. To set it up, on the control panel of your printer, press on Setup > Fax Setup > Ringing and Answering.
If you have an answering machine, set your printer to pick up 3 rings higher than your answering machine. If not, set it to pick up on the 5th ring that way you will still have time to pick up the phone if it's a voice call.
If you have a voicemail service from your phone provider, you'll need to contact your phone provider to get a distinctive ring feature. Once you'll have that feature, you can assign a distinctive ring to your printer. You can find that under Fax Setup > Ringing and Answering > Ring Pattern.
The phone has 8 ring tones. From the idle phone, press PROGRAM and dial 99. Press the intercom or a CO line button TWICE and dial 2-8 on the keypad (1 is already default). When you're satisfied with the tone, press STORE. You have to do this for each line and the intercom you want to change and you need to do this at each phone. Pick up the handset and drop it back down to exit programming.
1.Press the ^ or v button toincrease volume while on a call2.Selecting ring pitch and ring volume•Pickup handset•Pressprogram button•Dial#•Dial0-9 RINGING VOLUMESOFTMEDIUMLOUDRINGINGTONE PITCH SLOW 123 MEDIUM 456 FAST 789 OFF b> 0 b> b> b> b>
1 Press program key
2 Dial 99
3 Press line key or intercom key twice
4 Dial 1-8 for tone type
5 Phone will ring with new tone
6 Press store button(autodial)
7 Press program key to end
the number is busy. Try pressing the monitor button and listening for a dial tone. No dial tone means your phone line is not working. If you have dial tone, dial the number you wish to fax and listen to see if it picks up. If you get a busy signal, or hear someone answer, that is why it's not working. If you hear the fax tones, press start and send your document. This is a way to fax that allows you to hear the whole process.
From each phone, press PROGRAM 99 and the INTERCOM or CO buttons TWICE, then dial 1-8 and STORE. (default is 2). You can now make each line and intercom different, or each phone (up to 8) different. After you finish with each phone, just pick up and drop the handset back into the cradle to end programming.
I think I know this one, so please rate this a FixYa!
Do not pick up the handset. Press PROG press each line button TWICE. Press the Down arrow on the NAVIGATOR button. It will play ring tones in choices 21-30. Press ENTER to save.
You have to do that for each line you want to ring differently.
phone type. all line work with 2 wires tip and ring so if u have 1 line 1 pair (2wire) 2 line (4wire)your jacks need to be wired that way also..
×