Question about Fuji Cameras
I got the message "card is protected" When I tried to remove it, it would only release part way and will not come out. How do I remove it?
It sounds like maybe one of the pins are broke, I wold try flashlight and magnifying glass to inspect it, If you find one of the mettle contacts on the card is broke it is probably ok to just pull it out firmly it will break the card contacts but I doubt it will harm you camera ~T?M~
Posted on Feb 27, 2019
SOURCE: samsung micro sd memory card
THE CARD IS WRITE PROTECTED
OR THE FILES COPIED ARE WRITE PROTECTED.
SO REMOVE THE WRITE PROTECTION ITS LIKE A SMALL SWITCH WHICH SLIDES ON THE CARD .. ONLY CERTAIN CARDS HAVE IT .
NOW IF THIS DOESNT WORK
PUT THE CARD IN A PHONE AND SEE PROPERTIES OF THE DATA THERE , REMOVE WRITE PROTECTION .
Posted on Jul 28, 2008
SOURCE: Micro M2 memory card adapter
Memory stick flash memory is tricky. If it is too small, DO NOT INSERT IT. I made this mistake and was lucky enough to have some tools handy to get it back out. You'll need a different adapter to use it in the memory card reader that you have.
As for "guest" 's conundrum. You will need to use either needle nose pliers or tweezers to VERY CAREFULLY remove it. It won't be easy and you have to be careful so as not to push it farther in (which eventually it will stop going in, but still makes it that much harder to get it out)
Posted on Mar 25, 2009
this is the manual
go to page 99 it tells you there
Posted on May 01, 2010
The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.
Use these at own risk as it may further damage the camera.
Firstly , try connecting your ac adapter or usb cable.
Try holding the shutter button while switching on the camera.
Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).
Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.
Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.
Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.
Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.
If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.
You can also have a look at THIS link.
Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.
Posted on Oct 07, 2010
Tips for a great answer:
Mar 21, 2016 | Fuji FinePix Cameras
Jan 19, 2014 | Fuji FinePix F460 Digital Camera
Dec 25, 2012 | Fuji FinePix S700 Digital Camera
May 10, 2011 | Fuji FinePix S700 Digital Camera
Apr 04, 2011 | Fuji FinePix F601 Zoom Digital Camera
Feb 20, 2011 | Fuji FinePix S700 Digital Camera
May 01, 2010 | Fuji FinePix S700 Digital Camera
Apr 24, 2010 | Fuji FinePix S700 Digital Camera
Jul 12, 2009 | Fuji FinePix S700 Digital Camera
Jun 09, 2009 | Fuji FinePix S700 Digital Camera
50 people viewed this question
Usually answered in minutes!