Question about Blaupunkt IDC-A09 5-Disc CD Changer

1 Answer

All lights flashing, cant get cd's out

Hi

just bought used car, inserted cd's. 1st 2 drawers wouldnt play, 3rd did, then failed after that. now just got flashing lights and cant even eject cd's. Also, no manual with stereo, so guessing no pin codes in case of power loss, can I get pins for them?

thanks a lot!!

rkris

Posted by idcrysys on

  • 2 more comments 
  • idcrysys Nov 26, 2007

    oh, model is blaupunkt IDC-A 09 cd changer!!

  • sxyboy Dec 01, 2007

    ive got the exact same problem. Cd's are loaded after awhile,dont want to play,and all lights are flashing.

  • mickboy Dec 01, 2007

    Dito, the problem is exactly the same as mine. I had slot 3 working for about 5 mins. Now its back to the flashing light stage with the disk stuck......

  • NIcknack1 Jan 06, 2008

    Lights flash on and off but cd's will not eject

×

Ad

1 Answer

Mark Waller

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 199 Answers

Ok guys thius it how it works.

Blaupunkt supply a repair kit for this unit, this basically is a fix. but only works for 8 out of 10units.

its a pain to fit too.


you have to replace the 3 spindle guides and arms. the part number is : 8619001490 there a reall complicated thing to fit.
i am looking to get a install guide sorted. and will soon be selling the kits on my website
www.carradiospares.co.uk

Regards


Mark
Blue ICE

Posted on Feb 24, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

There is a cd in the drawer and it plays great. But i cant get the drawer to open to change it


You may have a load / eject motor issue.

That being said there should be a pinhole to eject the CD. Straight out a paper clip and insert into the hole and press the manual eject button

May 06, 2016 | Audio Players & Recorders

1 Answer

Minolta di520 error code C0990


C990-C994 3rd drawer lift up and 3rd drawer elevator motor failure.Check the actuators and two motors .
Removal of the 3rd drawer:
1.Press the paper descent key and slide the 3rd drawe out to the front.If pressing the paper descent key does not allow you to slide out the 3rd drawer,insert a screwdriver or similar object trough the hole in the rear cover and unlock the drawer.
2.Remove 4 screws on the slide rails and pull the 3rd drawer out to the front.
3.Unplug 1 connector,loosen 2 thumbscrews to remove the connector board assy and remove the 3rd drawer.
4.Remove 4 screws,unplug one connector and remove the cover.
5.Remove two screws and the drive bottom cover.
6.Check the gears.

Aug 13, 2012 | Office Equipment & Supplies

1 Answer

Cannot play Oregon Trail 3rd edition after install


Since you own a copy of the game, it is legal for you to go and download a No-CD crack. There should be many online, simply go to google and type in the Name of the game and No-CD crack. You should be able to find one, they also typically come with instructions on how to use them.

May 29, 2009 | The Learning Company Oregon Trail 3rd...

1 Answer

I have a compaq 5000 and i went to turn it on and the screen is black with a flashing curser and nothing loads is there a way i can load windows on it, and by the way the cd rom dont auto run my restore...


hi! there,
click F2 or delete configure your bios set up,
1st. priority cd room
2bd priority hardisk
3rd floopy
click F10 exit and save
rhen start run,insert your restore cd.cheers
thanks

Apr 05, 2009 | Compaq Presario 5000 PC Desktop

2 Answers

Will not accept and play a cd


HI...
It's most likely the draw belt that moves the drawer in/out.
Belt is cheap but opening the unit might not be.

Jan 09, 2009 | Bose Wave Music System CD Shelf System

1 Answer

CD player does not work


10/6/08 Update.
Solved the problem myself.
Repositioned the printed circuit board with the CD Drawer open/close limit switch.
I suspect that the board shifted during shipping and failed to trigger the closed drawer position.
Player is now working.

Sep 27, 2008 | Emerson NR303TT CD Shelf System

Not finding what you are looking for?
Blaupunkt IDC-A09 5-Disc CD Changer Logo

535 people viewed this question

Ask a Question

Usually answered in minutes!

Top Blaupunkt Car Audio & Video Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

IYPE KOVOOR

Level 2 Expert

66 Answers

Are you a Blaupunkt Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...