How can i fix my wireless router - Linksys Wireless-G WRT54GR Router

Dear if you want to use more than one wireless device router then one router is primary and other is setting bridge then you can connect simple as simple to other.
do this i have connect four router with this technology

try use a more stable routers like DLink routers.

You will need to check the wireless settings of the router
is there any computer connected to the router ?
If yes then you can open the router set up page on that computer.
Router set up page is the page where you can check all the wireless settings of the router.

Hi

try resetting the router first, then upgrade the firmware on the router & reconfigure the router

If that is the case changing the wireless settings of the router like the SSID and channel will be able to fix it by accessing the router setup page, but I strongly suggest you just reset the router by pressing the reset button for 10 seconds and then after that reconfigure it back that should fix it...........

Just in case it helps anyone else, I just had to toggle between broadcasting SSID and fixed the problem.

if the router has a reset button at the back press it for 10 seconds then turn it off and then turn it back on - will reset the route rto factory defaults and may fix the wireless light to comeon

Your IP address for you linksys router needs to be changed.  More than likely there using the same IP address such as 192.168.0.1.
You have to convert your linksys router to a switch and change the IP address range it uses to on that doesn't conflict with the Verizon router.
10.150.1.1 should work.

The only difference is that Wireless B is older and only hits 11Mbps. Wireless G is a step above, it is backward compatible, and supports up to 54Mbps.

If you are looking for more than that try wireless N.