Galaxy 55hp CB. Why doesn't it turn on?

SOURCE: SCREEN AND POWER CUT

maybe the inverter board for the screen issue- the power issue seems to be LG has power board design flaw- basically last time I looked the power board is manufactured NOT by LG but by H&E ...who designs this stuff??

SOURCE: my galaxy 959 cb radio wil not put out any transmit

Hi,

Based on your post of no transmit, a couple of possibilities:
1. defective microphone or cord or PTT switch (the red TX light does not come on when pressed);
2. TX light comes on but no output, defective finals and/or drivers. These are the transistors screwed to the chassis of the radio very near the antenna terminal;
3. defective regulator IC that provides the TX B+;
5. insufficient amperage from you power supply;
6. too high SWR.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

SOURCE: I have a Galaxy 959 cb radio. I have extended the

its normal its only cause your useung more power from the deck

SOURCE: Was talking on cb and power supply went to beeping

THE BEEPS INDICATE THAT THE OVERVOLTAGE PROTECTION IS ACTIVATED,DO NOT HOOK UP ANY THING TO THAT POWER SUPPLY!!!OR THE FULL UNREGULATED VOLTAGE (20-30 VOLTS)WILL PASS FROM THE SHORTED REGULATOR TRANSISTORS TRHU YOUR GALAXY AND FRY IT.GET IT TESTED BY A PRO,USUALLY THE REPLACEMENT PARTS FOR POWER SUPPLY ARE DIRT CHEAP.
GOOD LUCK.

SOURCE: loss of power on 1998 ford powerstroke 7.3

Generally the computer is reading a problem with the fuel pressure being to high or to low. The ICP is one problem it could be and you changed it. The other could be Fuel pressure regulator control solenoid or problems with the injector (s).

Testimonial: "thanks alot, this pretty much confirmed what i thought. someone befor me put an elec. fuel pump and straight wired it to the ign. thanks."