Question about Nortel Lands Phones

Open Question

Edit delayed ring time on Nortel T7316 phone system?

We want our auto attendant to answer the phone with our menu after a certain number of rings if our reception is away from desk. We have night ringing but we don't want to turn that on every time she walks away. Thanks!

Posted by Anonymous on

Ad

5 Related Answers

AnnaB3

  • 1 Answer

SOURCE: IIncreasing the number of times the phone rings before message system answers

I have a Panasonic KX-TG5632 and I need to set the ring time, how do I set the ring time?

Posted on Jun 10, 2008

Ad

Anonymous

  • 2 Answers

SOURCE: number of rings before answering system goes on

You can adjust the Answer Delay time by going to Menu then DTAD. Adjust the Answer Delay under this menu... 6 seconds per one ring.

If you have auto attendant set up to answer for you in a multiline system, set that delay accordingly. That will be the first system to pick up, You should set up one auto attendant for every voice line coming into your phones.

Posted on Nov 17, 2008

Ad
Vit Avaya BP

Vitaly Kagan

  • 211 Answers

SOURCE: Avaya 18D Change Number of Rings

Programming is done on extension 10 or 11
Press feature 00
Left intercom, Left intercom
#506
mode 1
line 01
number of rings 4
do the same for all lines
Cheers

Posted on Apr 14, 2009

terry gormley

  • 52 Answers

SOURCE: auto attendent voicemail locked

Go to this phone press feature 983 this takes you to admin change mail box .The general mbox is 100 this is the mbox you want to change

Posted on Oct 09, 2009

consultel1

george peters

  • 860 Answers

SOURCE: we have nortel t7316 phones in our office. one

Programming is done on M7310, M7324 and T7316 sets.
To set up ringing you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt,
press the show key (top right arrow).
The display should now ask for an extension number. Enter extension number you wish to program ringing on.
Press the show key (top right arrow)
The display should sat LINE ACCESS
Press the show key (top right arrow) .
The display should say LINE ASSIGNMENT.
Press the show key (top right arrow) .
The display ask for a line number. press list
The display should say line 001: appear & ring
press the Chng key till it says appear only
press next key (lower right arrow)
The display should say line 002: appear & ring
repeat the procedure the same as line 001 for the remaining ringing lines

press the release key when finished

Posted on Apr 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nortel/Norstar ICS phone system - Calls go to wrong voicemail on calls forwarded with NA


Check the forward no answer setting for number of rings on each extension that has ringing lines. The number of rings should be more than the auto attendant is set to answer with.

Nov 01, 2013 | NorStar Lands Phones

1 Answer

Extension cant answer in night service


This is a programed feature for the phone system. You will need to have your vendor reprogram the system to either allow for more rings, or simply turn the night service option off when still in the office.

Oct 14, 2009 | Mitel 5212 IP Phone

1 Answer

Help answering calls during peak call times


Yes you need the PC ASA card and not ASX,

Example: to speak to a live person dial 72 and the zero time out option sends it back to reception and it will place it on hold,

reception would need to activate a programmable button ASA button when experiencing high volume calls,

If nobody picks up it will revert to the reception or zero time out attendant with another greeting depending on what type of avaya voice mail you have?


If you have R5 vs mail or Partner mail and not a PC mail some tricks can be done.

This may not solve your answer and ring delay on day or night mode needs to be looked at.

The reality is you can delay the callers ability to get to a live person for a minute or so if they choose to hang out without a ASA card.

Send them to an unused ex port and assign the port to automated attendant two. Depending on you VM we can have up to 5 AA's and greetings.

The fact is if your receptionist can't place the call on hold with a music on hold greeting that says's Bla Bla Bla and more nice stuff and stay on the line we will be with you shortly then you need to hire a new receptionist.






Aug 08, 2009 | Avaya Lucent Partner 616 Phone

1 Answer

How to change Auto attendent Dial O to ring at multiple ext


First you will need to add extensions to a group X in #502
When you login to administrative mailbox you will change you operator extension to 7X. Phones in the group will ring

Apr 22, 2009 | Avaya Lucent Partner 616 Phone

1 Answer

Night ring change the number of rings


Auto Attendant
Answer Lines
1 – Feature 983
2 – Log: Dial 1020000 (3-digit DNs) or 120000 (2-digit DNs)
3 – Press AA
4 – Press LINES
5 – Line number: Dial line number (001-xxx).
6 – Line:xxx Ans:No Press CHNG to AA if auto attendant will always answer theline. If a Night Service key will be used to activate auto attendant answering, leave Ans: at No.
7 – If line has been changed to Ans:AA, press * then press TABLE.
8 – If Table:1 is OK press RINGS. (Table 1 is the default greeting table. Change to a different table (1-4) if alternate answering is required on the line being programmed.)
9 – Rings:0 – Press CHNG, dial number of rings before auto attendant answers the line, or leave at 0 for immediate answering. Allow at least 2 rings if CLID is in use.
10 – Repeat for each line to be programmed.

Notes For Night Service Mode Auto Attendant Answering
If the auto attendant will only answer lines in night service mode, line answering should be set to No as per step 6 above. Using night service will cause the AA to answer lines immediately.

Feb 11, 2009 | NorStar M7324 Telephone

1 Answer

Kxta824 disa help


Your system has 3 modes of operation, day, night, and lunch. Lunch doesn't have to be a specific time, and you could manually switch between the 3 modes. Most small customers don't even use NIGHT mode, except to control the voice mail system.

Full programming instructions are beyond the scope of the free forum, but in section 3.1 of the programming tool, you set the mode of the trunks for day/night/lunch. No matter what the status of the auto switching to day/night mode, you can still manually switch to lunch by dialing 782 from any phone, and manually switch back to day/night mode (780/781) to turn DISA mode on or off.

Now, you still can have different OGM's for day and night that will automatically work, and manually use the lunch to control the applicaion of DISA. Even if the receptionist steps away from the desk, you can go into 3.2 and turn on some delayed ringing, or anyone can put the system back in day or night mode.

Carl

Jan 30, 2009 | Panasonic KX-TA824PK Phone

1 Answer

Panasonic 816 reduce from 4 to 1 ring before auto attendant ans.


You can voice mail to answer after one ring.
You will need a programmer to program ringing.
[email protected]
Tony

Dec 02, 2008 | Toshiba DKT-2020 Corded Phone

1 Answer

Night switching for KX-T7630


You have 4 different modes of calling available to be programmed: DAY NIGHT BREAK and LUNCH. Your installer has to set up the ICD groups, but you can create a LUNCH group which looks like the day mode but rings all phones. The codes are accessed by dialing on the intercom *780x where 0 is day 1 is night 2 is lunch and 3 is break.

You may use the NIGHT mode in the daytime, but if you have voice mail, it will play the night greeting instead of a day greeting.

Carl


Sep 09, 2008 | Panasonic KX-T7630 Corded Phone

2 Answers

Number of rings before answering system goes on


You can adjust the Answer Delay time by going to Menu then DTAD. Adjust the Answer Delay under this menu... 6 seconds per one ring.

If you have auto attendant set up to answer for you in a multiline system, set that delay accordingly. That will be the first system to pick up, You should set up one auto attendant for every voice line coming into your phones.

Dec 18, 2007 | Lands Phones

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nortel Lands Phones Experts

martin hogg

Level 2 Expert

157 Answers

pbxinc

Level 2 Expert

64 Answers

Cindy Wells

Level 3 Expert

6099 Answers

Are you a Nortel Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...