Question about OKI Office Equipment & Supplies

1 Answer

Using Oki Microline 320 Turbo as a network printer for 3 users. All of a sudden 2 of the users can not print. Settings show it's a shared printer, unistalled and reinstalled but nothing.

Posted by Eagles Wings on

Ad

1 Answer

Andrew Henderson

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • OKI Expert
  • 394 Answers

It could be a re-allocation of IP address. The best solution to that is to allocate the printer a specific permanent IP address and but the same setting into the port address for the machine on every PC using it

Posted on Mar 18, 2019

Ad

5 Related Answers

Anonymous

  • 1 Answer

SOURCE: Alarm light Microline 320 Turbo 9 pin printer - won't print

We swapped out the printer for another one we had in the office that was working. The new printer also got the alarm light. From that we concluded that it was a bad serial card. We swapped the serial card from another printer, and the original printer started working perfectly. Now we just need to find out where we can purchase another serial card, as we have no more 'spares' around here.

Posted on May 23, 2008

Ad

Anonymous

SOURCE: oki microline 320 turbo printer

Did you check your print queue? May be there is an error in there waiting for you to instruct it.

Posted on Jun 05, 2008

Anonymous

  • 161 Answers

SOURCE: oki microline 320 turbo

Your Oki model does not need drivers, for they are already contained since Windows 98 and up. However, if it still doesn't work, check that the printer emulation is set to IBM and then install a new printer using the IBM Proprinter II/III driver, also contained in Windows.

Be blessed.

Posted on Nov 07, 2008

Desmond Pillay

  • 40 Answers

SOURCE: OKI DATA MICROLINE 320 TURBO PRINTER PROBLEM

Hi Charles,
Use the IBM proprinter driver for this printer and select IBM in the menu of the printer.
Hope this helps.
Dezzi

Posted on Nov 29, 2008

chamboard

B.Th. Pluijm

  • 558 Answers

SOURCE: how to buy the ink for oki microline 320 turbo

google for it on the net like refil or new cartridge

Posted on Nov 06, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printing trouble, OKI microline 320 Turbo. All of a sudden it's not printing the right side of the invoice. I have no idea how to increase the printing area so this doesn't happen. Please help!


There are 3 competing controls. 1) Software 2) Printer driver 3) Front panel. Software control overrides printer driver. Printer driver overrides front panel. Your software settings therefore dominate. That said, you can choose to have the front panel settings "dominate." Those front panel settings may enable you to change margin widths. Even though this may be possible, you may well find the solution is within the invoice software's print setup where you may have to check some box to enable 11 inch printing or whatever is required. But that requires knowledge of the invoice software program. I am unable to determine if you are encountering a sudden failure of a system previously working. If this is a printer failure rather than a software configuration problem, you will have to check the okidata help.

Here is some reference material:

Okidata Users Manual ML320 ML321 Turbo Problem 1 My word processor files...

Apr 11, 2018 | OKI Office Equipment & Supplies

3 Answers

Problem with new installed printhead


If I remember the 320, there is a head-gap adjustment that is normally moved for replacement of the head and must be reset again. Check your manual for that term; 'Head gap adjustment'

Aug 18, 2009 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

Okidata 320 turbo microline prints jibberish


sounds like a job was sent to the printer with the wrong driver. There is no way to purge it just load some paper and let it run until it stops. They make sure your emulation matches the driver youa are using. Example Epson 9pin compatiable or OKI ML320 Turbo-IBM drive you want the emulation set to Epson FX. Or if using the OKI ML320 Drive you want the emulation set to ML.

Jan 15, 2009 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

Oki 320 turbo


Are you using the parallel or serial port ? .And what driver are you using ? if correct driver is being used maybe delete and re-install the driver.
Hope this helps.
Dezzi

Oct 08, 2008 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

Oki microline 320 turbo


Your Oki model does not need drivers, for they are already contained since Windows 98 and up. However, if it still doesn't work, check that the printer emulation is set to IBM and then install a new printer using the IBM Proprinter II/III driver, also contained in Windows.

Be blessed.

Oct 02, 2008 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

OKI DATA MICROLINE 320 TURBO PRINTER PROBLEM


Hi Charles,
Use the IBM proprinter driver for this printer and select IBM in the menu of the printer.
Hope this helps.
Dezzi

Sep 10, 2008 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

Microline 320


Looks like you can get the non-T manual from the Oki site:

http://my.okidata.com/PP-ML320.nsf?opendatabase

Aug 26, 2008 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

Oki microline 320 turbo printer


Did you check your print queue? May be there is an error in there waiting for you to instruct it.

May 22, 2008 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

Printer head adjustments


if you take the cover off on the left or right on the bar the bar where the carriage and head ride, there is a tab that will adjust the head gap, be careful if you get it 2 tight you my damage the print head

also I've see this be a bad head, pins not fireing all the way out.

Nov 20, 2007 | OKI MICROLINE 320 Turbo Matrix Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top OKI Office Equipment & Supplies Experts

Alvin Barnabas
Alvin Barnabas

Level 2 Expert

134 Answers

Timothy Van Der...

Level 2 Expert

152 Answers

Mike

Level 3 Expert

4372 Answers

Are you an OKI Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...