Question about Makita Saws

1 Answer

Where is the model number on a Makita sliding compound miter saw

Posted by cindy goetsch on

Ad

1 Answer

Kenneth Walker

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 293 Answers

Check on the back of the motor housing

Posted on Mar 12, 2019

Ad

5 Related Answers

Anonymous

  • 8197 Answers

SOURCE: Makita 10" Compound Miter Saw LS1040 manual?

Here you go.

This is the ls1040
http://www.makita.com/en-us/Assets/images/Products/LS1040/owners_manuals/LS1040.pdf
This is the ls1040f
http://www.makita.com/en-us/Assets/images/Products/LS1040F/owners_manuals/LS1040.pdf

Posted on Mar 12, 2009

Ad

Anonymous

  • 4088 Answers

SOURCE: I need a left-hand metric thread bolt that holds

Go to: searspartsdirect.com and enter the full model number minus the decimal point. Full drawings of all replaceable parts will be displayed as well as parts lists and prices. Hope this helps!

Posted on Mar 30, 2010

SOURCE: makita LS1013 compound saw wont slide,instruction

You may find, you have a lock, button, that needs to be held in, before you can drop the saw to cut.

Posted on Apr 28, 2010

rowdy45176

David Ford

  • 2176 Answers

SOURCE: I have a Makita LS

check position 79 the spring that pushes against the table and also the end of the locking knob to make sure not rounded over/worn not applying pressure to the locking spring.

Posted on Dec 22, 2010

rowdy45176

David Ford

  • 2176 Answers

SOURCE: Need to download a manual for a Makita LS1016L sliding compound miter saw

try going to makitausa.com to download the manual, if you can't find it there they have a contact us link and phone number that you can call for assistance, but I think that I saw the manual there.

Posted on Jan 11, 2012

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Makita 10" dual slide compound miter saw jerky while moving in and out. What,s wrong?

The pillow block bearing, guide bushings, or even the slide lock mechanism could be the culprit.
If you post the model number I can help narrow it down for you.
Feb 15, 2017 • Makita Saws
0helpful
1answer

I have a Malita dual sliding compound miter saw LS1016LX. Trigger will not start saw after 5-10 cuts. When saw sits for 30 minutes, it runs again.

I'd contact a Makita dealer. I've had this saw for years without a single misfire on the trigger. Could be heat related, but that's a stretch. Here's their contact information:

Makita Contact Us
1helpful
1answer

Makita L1011 compound sliding saw with sticky miter table

The LS1011 doesn't have a table angle release lever like the newer models so it's harder too swing the table from angle to angle, this also causes the plastic swing body to crack. Have you loosened the locking screw for the table? The table may have to be removed and the pivet shaft greased. I had this problem with an old Makita Table Saw 10" 2600.
Feb 01, 2013 • Saws
0helpful
1answer

My LS1216 slide compound miter saws mitering table is stuck at 0 degrees it appears jammed although I've looked for something jammed stopping the plate from moving and see nothing, the handle locking...

Hello stella....... There is a locking mechanism on the miter saw to lock it on whatever setting you require. loosen that locking mechanism and the saw should move for you. Here is a schematic of the parts so you can see exactly which parts are involved

http://www.searspartsdirect.com/partsdirect/part-model/Makita-Parts/Saw-Parts/Model-LS1220/1339/0744300/P8100100/00002?blt=06&prst=&shdMod=

Joe

Thanks for choosing Fixya!
0helpful
1answer
2helpful
1answer

My saw is really stiff when you try to change the angle .I oiled it but this didn't help. I would like to know how to take it apart but I am un sure how to do it and what is in the boxed off area...

Exploded diagram with parts list for LS1016 10" Dual Slide Compound miter saw is here.

Owner's manual is here. If these aren't quite what you need, you can view other models of Makita miter saws, here.

One thing to bear in mind. There's a miter angle lock and a slide lock on the bottom front of the saw. If you don't have the miter angle lock loose enough, it will be difficult to turn the saw.

If this answer was useful, please vote for it. Thanks!
2helpful
2answers

Makita LS1013FL manual missing

Yes go to Makitausa.com and type in your model number and you can download an owners manual for the tool. Let me know if you need any more help
Not finding what you are looking for?
Saws Logo

Related Topics:

164 views

Ask a Question

Usually answered in minutes!

Top Makita Saws Experts

ray gallant

Level 3 Expert

73384 Answers

Brad Brown

Level 3 Expert

18789 Answers

Parson's Repair...
Parson's Repair...

Level 2 Expert

272 Answers

Are you a Makita Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...