Question about Nortel Norstar M7310 Telephone

Open Question

How to mute the dual tone beep on Nortel M7310?

When I'm not on a call I like being able to press a line that is in use to see which staff member is using that line, allowing me to know whether someone is available or on their phone. Unfortunately, this button press produces the loudest, most annoying dual tone beep. Any way to mute this sound without muting the ringer as well? Thanks!

Posted by Sarah Hugh on

Ad

5 Related Answers

Anonymous

SOURCE: People can't hear me - Mute button?

I have the same issue with Uniden cordless DCX640 - the phone was working fine but it seems to be on mute

Posted on Feb 08, 2008

Ad
cnavarro

Carl Navarro

  • 2460 Answers

SOURCE: Mute - Turn On??

Welcome to Panasonic :-)

The mute button works when you have a speakerphone call. That means SP-PHONE pressed and press MUTE and it flashes to let you know it's on mute.

Maybe software version 9.0 will fix the mute to work on handset calls.....

Carl

Posted on Sep 04, 2008

Ad

Anonymous

  • 4 Answers

SOURCE: Ringer

You may need to change your Ring Volume. Here are some instructions on how to do so.

To Change your Ring Type:
1. Press the Feature button, then * 6
2. Press the number keys 1 – 4 to hear the different ring types
3. Press the OK softkey when you hear your desired ring

To Change the Ring Volume:
1. Press the Feature button, then * 80
2. Press the volume key up or down
3. Press the release key1 to exit and save the volume level


Let me know if this works for you.

Posted on Oct 29, 2008

bubba357

  • 2 Answers

SOURCE: can't dial out

On my 9417cw this happened from time to time and I found a very simple solution. Disconnect the power supply for a few seconds and plug it back in....voila!

Posted on Nov 14, 2008

Anonymous

  • 1 Answer

SOURCE: Panasonic KX-TD7896 Phone phone no longer rings only vibrates

Is there an 'M' on the display? If so, that means it is in 'meeting mode.' All you have to do is press and hold the star key (*) and that will take care of it.

Posted on Dec 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nortel m7310 cant use touch tone


Try Feature 808 before pressing the touchtone digit - it tells the Norstar to send Long Tones to the remote system.

Jul 22, 2013 | Nortel Meridian M7310 Business Phone...

1 Answer

M7310 Non-Stop Dial Tone


Intercom button/s provide dial tone when they are pressed. They are required to call other phones on your system.
Sounds like your button is stuck or issue with the motherboard.

Dec 17, 2012 | NorStar Meridian M7310 Phone

1 Answer

All of a sudden the line lights on our nortel switch Meridian M7310 phones started blinking and the lines are dead. Any ideas?


If you only have one line,why not just lose the Nortel system? You can reuse the wiring from the phone sets to the contoller as regular inside wire,and just plug in regular phones(and maybe put the Nortel phones and controller on EBay and make a few bucks off it!)

Oct 26, 2012 | NorStar Meridian M7310 Phone

1 Answer

Mute speaker on M7310


I've had Nortel Norstar m7310 phones for years and the entire time that I've them, I've never used the speaker phone. I could hear them, they couldn't hear me. At this site, I figured out how to fix that and now the speaker phone works. It created another problem. For me to use the Called ID, I would have to press the line that was calling and I would see who it was that was calling. Now, when I do that, it immediately picks up the phone versus letting see who is calling. I want to be able to both see who is calling and use the speaker phone. Thanks.




Parts For BMW

Jun 13, 2012 | NorStar Meridian M7310 Phone

1 Answer

Cannot get the pulse tone off the line and that prevents from voicemail access and call forwarding HELP!


In guessing that since your lines have defaulted to pulse dialing that you have an older Nortel system such as an 8x24 or a 6x16 system. That being said you'll need to program touch tone dialing on each line.

Programming is done on M7310, M7324 and T7316 sets.
To set up ringing you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
the display says A. Configuration
4 top line/feature keys are now used for programming
Press the show key (top right arrow)
the display will say1. trunk/line data
Press the show key (top right arrow) .
the display will say line 001.
Press the show key (top right arrow)
the display trunk data
press the show key (top right arrow) Press the next key 7 times(bottom right arrow) .
The display should say Dial mode: pulse.
Press the Change soft key (below the display).
the display should now say tone. press the heading key (top left arrow) to get back to "trunk/line data" repeat the steps for the remainder of your active lines
press Rls when finished

Nov 04, 2010 | NorStar M7208 Corded Phone

3 Answers

Why won't the phone come on when I connect it to the outlet?


it depends on which phone you have sometimes a phone may not have one.

Apr 15, 2010 | NorStar Meridian M7310 Phone

1 Answer

Need Caller ID displayed on Nortel StarTalk Flash/M7310


A question: -> does your phone ring? -> what software are you running on the system? If you know this will help a little in giving you more information. There is a Feature that you can dial if your phone rings... when there is a call coming in, dial FEATURE 8 1 1 You can even make this a button rather than dialing this feature code everytime: -> Feature * 3 -> press the button that you want to program -> dial Feature 8 1 1

Jul 16, 2009 | Nortel T7316E 2-Line Corded Phone

1 Answer

Nortel T7316E acts like M7310


Feature *81 will move line buttons.

May 04, 2009 | Nortel T7316E 2-Line Corded Phone

1 Answer

Vintage phones cannot dial out


Any standard phone should work, even phones made in 1800's should still work on a standard phone line.

I'm not sure what phone you have. The one listed in the question "M7310" is a business system phone and will ONLY work on the Nortel business phone system.

If you have standard home phones, my only suggestion (using the information supplied) is to check if the Tone/Pulse switch is set to tone... even though both should work.

Do you have phone service through a cable line?

May 28, 2008 | NorStar M7310 Phone

Not finding what you are looking for?
Nortel Norstar M7310 Telephone Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nortel Computers & Internet Experts

Joel Rodriguez
Joel Rodriguez

Level 2 Expert

465 Answers

MrFixitSTTL

Level 3 Expert

326 Answers

Vebble

Level 3 Expert

395 Answers

Are you a Nortel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...