Question about Kenwood Food Mixers
Any idea how many operational hours? I suspect motor brushes but can be other.
Posted on Jan 23, 2019
hers the manaul for u rate me as fix ya ok its a pdf file also thx nick use adobe reader to view it 43 pages thx agian for using fix ya
Posted on Feb 04, 2008
I had the same problem. Had to strip the machine down to get to the motor. On the top is a moving plate with various capacitors etc mounted. On the front side there was a Capacitor (At least I think it was) with the wire broken.
I resoldered it and the machine now works fine.
I hope this helps
Posted on Jul 05, 2008
How old is the machine?
The leaking comes from the lower gearbox assembly, ther are two kind of gearbox. There are two kind of vertical drive shaft, 14mm and 12,7mm that goes through the gearbox.
You can try to replace the grease, make sure that is vegetable grease.
Posted on Jul 14, 2008
could be one of three things
1) the belt is broken to the main gearbox (fairly easy to replace if you can get one)
2) a gear has slipped or broken which means none of the front end will operate.(I have this problem and cannot get the gear body to open)
3) If the top and front worms are turning then the problem is with the planetary gear which again is fairly easy to replace
Posted on Apr 30, 2009
Tips for a great answer:
Oct 29, 2018 | Kenwood Food Mixers
Oct 16, 2012 | Kenwood Chef Major A701 A901 Cm170 Km201...
Jan 19, 2012 | Kenwood KM400 / KM410 Chef Classic Stand...
Nov 01, 2010 | KitchenAid K5SS Heavy Duty Commercial...
Nov 15, 2017 | KitchenAid K5SS Heavy Duty Commercial...
Oct 02, 2008 | Kenwood KM400 / KM410 Chef Classic Stand...
Aug 16, 2008 | Kenwood KM300 Chef Stand Mixer
Apr 20, 2008 | Kenwood KM400 / KM410 Chef Classic Stand...
May 14, 2007 | KitchenAid K5SS Heavy Duty Commercial...
204 people viewed this question
Usually answered in minutes!