The lift on my sewing machine cabinet is broken...it won't go up or down

It sounds like you're experiencing an issue with the knee lift on your Pfaff Quilt Expression 4.2 sewing machine. Here are a few steps you can try to resolve the issue:

1. Check the knee lift lever: Make sure that the knee lift lever is not obstructed and that it is properly positioned.
2. Check the linkage: The knee lift mechanism is connected to the sewing machine via a series of linkages. Make sure that all linkages are connected and not broken or bent.
3. Lubricate the knee lift mechanism: If the knee lift mechanism is stiff or difficult to move, try lubricating it with a sewing machine oil.
4. Check for loose screws: Check for any loose screws or bolts that may be causing the knee lift mechanism to malfunction.
5. Check the foot control: Make sure that the foot control is functioning properly and that it is securely connected to the sewing machine.

If none of these steps resolve the issue, it may be necessary to take your sewing machine to a professional for repair.

We are in North America, but I found you the Aussie Office. Phone them on Tuesday.

Address: 27 Binney Rd, Kings Park NSW 2148, Australia Hours: Closed ? Opens 9 a.m.
Easter Monday might affect these hours Phone: +61 2 8881 9567

Horn Furniture Australia

https://horn.com.au Products. Modular · Sewing/Quilting · Chairs · Embroidery · Quilting. Contact Us. Call +61 2 9672 3888; C\O SSS Furniture Division ...

Sewing

Craft Plus MKII V2 Table RRP $1,099.00$989.00. view product ...

Dealer Locator

395-399 Moorabool St, South Geelong VIC 3220, Australia ...

Horn Modular Sewing Cabinet

Horn Furniture Horn Modular Sewing Cabinet · Sewing ...

There are some videos in the link

https://www.google.com/search?q=Horn+sewing+cabinet

..

you can find many types of repair help here for your cabinet.

horn sewing cabient repairs

just google that and select the one you need or explore til you find it.

You probably can but not without doing some (maybe a lot of) retrofitting. Difference in machine footprint will make a big difference. Also, connecting the lifting hardware, etc. adds to the overall difficulty. You could always ask a handyman familiar with woodworking but chances are, the expense will be more than the machine is worth. But, then sometimes nostalgia wins!

...

try using some penetrating oil on the screw that doesn't want to come loose and see if that will help.

The old Horn lifts had vertical rails on the sides and the newer style has one center support. Push the lever up and press down on the platform to lower, push up on the lever and the platform should raise. If it binds, the plastic slides are broken or if the cables are loose, then the lift is likely broken. www.hornofamerica.com

there are several websites that have carry cases
1.ebay
2.nextag
3.bizrate
4.sears

Try this place, I have had good luck with them.

http://www.leevalley.com/hardware/page.aspx?c=1&p=41821&cat=3,48759&ap=1