Question about Stihl Saws

Stihl 051 av cylindrical crank bearing part number

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

My 051 stihl has vaiable rpm at full throatle under a load...why?

possible water or dirt in the carby and main jet
could be a leak in the fuel pick up ;line from the tank or blocking of the fuel filter at the line end in the tank
go google and type in ---workshop manual for stihl 051 chainsaw and they have a good pdf version to down load

Mar 19, 2016 | Stihl Chain Saw 051 075 088 090 +

1 Answer

I have the older model which has the 3 bolt ignition coil. If I replace the coil, does the new ignition coil have to be 3 bolt as well? the 3 bolt replacement coils are so much more expensive

Coils are usually engine specific, the number of bolts does not determine whether or not it will work. If you really want your chainsaw to work correctly - buy the right part. It's a cheaper than a new one! Using the model number you supplied, I found them for under $50, which is about the value of an old 050 Stihl -wow, that's a heavy old saw. If you are still (Stihl ;^ )) not sure, call a Stihl repair facility. There may be an old timer mechanic who knows.

Oct 19, 2015 | Stihl Ignition Module Coil 050, 051, 076,...

1 Answer

Grease lubricant bearing on a stihl br600

What bearing are you wanting to grease?? The only bearings it has are 2 crank bearings and you don't grease them.?!

Here's the parts manual, so you can check.

Oct 07, 2015 | Stihl Garden

1 Answer

Where is the decompression switch on a 075 stihl chain saw ?

If your unit is equipped with a decompression or it will be on the top of your saw. a little black button that you pull up or push down

Oct 15, 2014 | Stihl Chain Saw 051 075 088 090 +

1 Answer

Will a 090 carb fit a 051av

doesn't look like they will fit. Those saws are larger so require more fuel and would mot likely flood out the 051

If you need further help, I’m available over the phone at https://www.6ya.com/expert/kelly_69a0cf1b13789df1

Dec 19, 2012 | Stihl Chain Saw 051 075 088 090 +

1 Answer

Where can I get a choke button for my stihl o51 saw

small engine repair shop

Oct 25, 2012 | Stihl Chain Saw 051 075 088 090 +

1 Answer

Stihl 066 does not start. Replaced ignition module. Weak or no spark.

Are the poles on your flywheel blue? Are you using an open-air inline spark tester, or holding the plug against the cylinder and turning it over?

Jul 14, 2012 | Stihl Chainsaw 051 075 076 Drum Chain Saw...

1 Answer

Oil pump on 020 stihl

Remove the side casing,then remove the spark plug and use a piston block to stop the piston rising while you remobe the clutch, once the clutch is off, the drum, bearing and oil work should be removable,along with the 2 plastic crank coveres. Once all this has been taken off you will have access to the oil pump.

Apr 28, 2012 | Stihl 020av 020 Av Chainsaw Oil Pump...

1 Answer

How can chain oil get into firing chamber on a 051 stihl chain saw after it sits a few days otherwise it runs fine.The gasket between oil tank and crankcase is not broken.

I suspect your Stihl 051 has an impulse (pressure/vacuum line from crankcase) driven oiler or a pressurized tank with a duck valve on the end. The valve or the oiler is leaking and allowing oil to back flow into the crankcase. Stihl does not allow IPLs on the Internet or I could be more helpful.
You can go get help including an IPL here:
ArboristSite Chainsaw thread (free to join)
http://www.arboristsite.com/f orumdisplay.php?f=9
They are a good bunch of folk that are into all chainsaw. I recommend you do a search for an existing thread applicable to your problem or saw and join in the discussion.

If you have more questions or need additional help please reply below and I will get back to you. Thank you for using FixYa and Good Luck. HTH
Lou

Mar 03, 2010 | Garden

Not finding what you are looking for?

View Most Popular

Saws

My 051 stihl has vaiable rpm at full throatle under a load...why?

Stihl Chain Saw 051 075 088 090 +

Open Questions:

0 Answers

I have a Stihl TS 700 concrete saw. It start an runs very good,but sometimes at highspeed it suddenly stops. Then I just can start it again without any problems and it runs good again. I have replaced airfilter,fuelfilter,sparkplug. Do someone have an idea what the problem can be.

May 08, 2018 | Stihl Saws

0 Answers

stihl 026 chain saw I need to replace the Vibration Dampeners they are broke ,and the tools to take it apart. the saw won't cut like it should it pulls away from the wood.the dampers are broke.

Aug 30, 2017 | Stihl Saws

0 Answers

I have a stihl cut off saw inside the crankcase it has the numbers 911080210700 it has i5 on the casing, which model is this?

May 27, 2017 | Stihl Saws

Ask a Question

Usually answered in minutes!

Have a manual for Stihl Saws? Or just drag it here!

Stihl 051 av cylindrical crank bearing part number

Add Your Answer

Attachments: Added items

Related Questions:

My 051 stihl has vaiable rpm at full throatle under a load...why?

I have the older model which has the 3 bolt ignition coil. If I replace the coil, does the new ignition coil have to be 3 bolt as well? the 3 bolt replacement coils are so much more expensive

Grease lubricant bearing on a stihl br600