Question about Springfield Measuring Tools & Sensors

Open Question

We have a very old Springfield 3 channel thermometer that would give us the low and high temp and keep them until we would clear it. Is there a fix for it, or Is there a new Springfield that will.

Posted by Alidra Walker on

Ad

5 Related Answers

Anonymous

SOURCE: Temp

I've had my Samsung RS267 LASH side by side for almost 2 years now and the coils froze recently. The temperatures displayed - relating to the refirgerator side - bounce around when the coils freeze. My freezer thank goodness is still working properly. The repairman indicated that the heating element for the refrigerator coils was bad. Unfortunately he had to order the whole unit (coils, heating element, etc.) since he couldn't replace just the one part. Samsung takes their time sending the parts - we've been waiting for 10 days now. The Samsung warranty covers the compressor, evaporator, condensor, drier and connecting tube for 5 years parts and labor so we should becovered. You might be covered as well - depending on when you purchased your refrigerator. I did purchase a separate extended warranty from Lowes when I bought the refrigerator and I'm glad I did. My extended warranty included $250 in food spoilage covering our food loss due to the breakdown. Hope this helps......

Posted on Jul 13, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: I turn on bbq it lights, put temp settig to high

1 Uniflame 40,000 BTU 3-Burner Gas assembly video. where do i find the video

Posted on Oct 14, 2009

Ad
wfservices

Wayne Fellows

  • 262 Answers

SOURCE: Viking 6440, sticks in reverse. Hair dryer on high

You need to purchase a de-greaser spray to clean out the old grease. Im sorry but Im not an expert at this type of machine, but most of the inner workings are similar to all brands. You need to remove the top to expose the crankshaft device that is inside, and spray with a de-greaser. If you know the area where it sticks try that area first. A common de greaser is actually WD40. It lubricates and de greases, you could try this, if available in your area. You may have to use a lithium based grease for that machine I cannot say for certain. I do however have a link to the Husqvarna help site if that will help.. http://www.husqvarnaviking.com/us/2821_3079.htm

Posted on Mar 21, 2010

Anonymous

  • 146 Answers

SOURCE: AC not cooling

first off you should have a four ton unit. what is your super heat? is it pulling attic or outside air?

Posted on May 28, 2010

stpaulguy

Rick M

  • 4056 Answers

SOURCE: 2004 PT CRUISER NON TURBO OVER HEATING

Car overheats Chrysler Vehicles Ricks Free Auto Repair Advice

Posted on Aug 13, 2017

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What happens if two digital thermometers are set on the same channel


The same as when you have two radio stations on the same channel or frequency. The receiver wants so receive them both, resulting in a scrambled and useless signal in the receiver.
It won't work.
If the system can work with more than one (wireless) thermometer each will have an own channel number. and you will have to switch on the display to read one or the other.

Jan 05, 2015 | Springfield 91455 Wireless Digital Outdoor...

1 Answer

Springfield precise temp in out thermometer 91756


Return it to the manufacturer for warranty repair/replacement

Jul 23, 2014 | Taylor 91756 Wireless Thermometer With...

1 Answer

I have a Springfield precisetemp 433 wireless. The outside temp is reading 99 degrees when it should be reading about 70. When I disconnect the unit from the probe the temp is correct, so I'm guessing...


SOMETIMES WHEN METAL IS IN DIRECT SUNLIGHT IT WILL
GIVE FALSE READING. MY OUTDOOR THERMOMETER IS METAL AND IT READS ABOUT 15 DEGREES HOTTER THEN IT IS. BECAUSE IT'S IN DIRECT SUNLIGHT.

Sep 18, 2013 | Springfield Measuring Tools & Sensors

1 Answer

Is there an online manual for Springfield 91756 Wireless Thermometer w/Indoor/Outdoor Temperature & Humidity


Yes. Took awhile to find it, but here is the link: https://docs.google.com/gview?url=http://www.weatherconnection.com/manuals/91756.pdf&chrome=true

Aug 07, 2012 | Springfield Measuring Tools & Sensors

1 Answer

Instructions for springfield precise temp model 91455


I also reset my 91455 today. Go online to Springfield precise temp manual 91455

May 29, 2012 | Springfield 91455 Wireless Digital Outdoor...

7 Answers

GE Digital Wireless Thermometer


Wireless Digital Thermometer GE5805WS4
Instruction Manual

Buttons and Functions
Button Function
Front of unit:
Min/Max...........displays Min or Max temps recorded
CH(Channel)......changes displayed channel
(hold 3 sec to erase)
Clear................clears memory in Min/max display
Back of unit:
C/F....................Toggle between Celsius
or Fahrenheit temperature display
Scroll.................Remote Channel Scrolling ON/OFF

INSTALLING BATTERIES
IMPORTANT:Read the section SETTING UP THE THERMOMETER before installing the batteries for the first time.

1.Remove the rear cover of thermometer. Install 2 new AA batteries. Replace battery cover.
2.Loosen 4 screws on rear battery cover of the Remote Sensor and slide battery cover off.
3.Install 2 new AA batteries .
4.After batteries are installed, the remote sensor will begin transmitting and automatically register to the Thermometer
(within range) after several minutes. However, you can also press the small button in the battery compartment (labeled Tx) to register the Remote Sensor to the Thermometer immediately
5.Replace battery cover and tighten 4 battery screws. Make ure that the battery cover is fully on and tightened to assure a watertight seal.

SETTING UP THE THERMOMETER
The thermometer can monitor up to two different Remote Sensors on two separate channels. Add-on remote sensors can be purchased separately and are compatible with the GE Wireless Thermometer/Clock (model GE5805WS4) as well as this unit. When first installing, always insert batteries into the Thermometer first, then into the Remote Sensor.
The thermometer uses random security code technology-it will learn the random code of the first Remote Sensor it detects and log in as channel 1. Channel 2 will register in the same way. NOTE: Registered channels will be erased when the batteries of the Thermometer or Remote Sensor are removed. When replacing batteries for a Remote Sensor, remember to clear the corresponding channel of the Thermometer in this way:

1.Remove batteries from the remote sensor (step 2 of installing batterie)
2.Select the channel that you would like to clear by pressing the CH button on the Thermometer until this channel number is displayed.
3.Hold the CH button for 3 seconds to clear the channel
4.Follow steps 3-5

MOUNTING THE REMOTE SENSOR AND THERMOMETER
Remote Sensor is suitable for outdoor mounting (watertight) at a range up to 100 feet from the Thermometer. HOWEVER, HE UNIT SHOULD NOT BE MOUNTED IN A POSITiON WHERE IT WILL BE SUBMERSED IN WATER, OR EXPOSED TO DIRECT SUNLIGHT, OR NEAR OTHER SOURCES OF HEAT OR COLD (I won't bother typing the rest) except for:

LOW Battery icon for the sensor will show up on either the
ch 1 or ch 2 display depending on which sensor is losing battery power.

Battery life 6 months
Temp Range Therm 32 to 122 deg F
Remote Sensor -58 to 158 deg F *
*Alkaline batteries can freeze temporarily at temps below -4 deg F. In this condition, the Remote Sensor cannot accurately transmit temp info to the Thermometer. This limits the effective minimum temp fo the Remote Sensor to -4 deg F

Operational Range....>50ft(and up to 100ft)(less interferances)

RF Channel ....refresh to "---" if no signal received in 60 minutes

Jan 06, 2008 | Heating & Cooling

Not finding what you are looking for?
Measuring Tools & Sensors Logo

Related Topics:

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Springfield Measuring Tools & Sensors Experts

Brad Brown

Level 3 Expert

18562 Answers

Harrie

Level 3 Expert

6746 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

35750 Answers

Are you a Springfield Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...