I have russell hobbs kettle model 3070 just stopped working when i boiled water. and no power coming on. how do i fix the problem?

It appears that most parts are obsolete. You may have to just grow flowers in it as a keepsake.

https://www.google.com/search?q=Russell+Hobbs+Kettle+model+3100%2F1%2F2+parts

This was sooo promising

Russell Hobbs Obsolete Switch Assy Stat 3100/1/2 Kettle

BuySpares https://www.buyspares.com > kettle > product > shop=...

Buy Russell Hobbs Obsolete Switch Assy Stat 3100/1/2 Kettle online from BuySpares. Specialist supplier of Russell Hobbs Kettle Spares, Parts & Accessories.

..

instructions - Russell Hobbs

uk.russellhobbs.com/pdf/14590_stylis_black_kettle.pdf

2 Don't put the kettle, stand, cable, or plug in liquid. ... 4 Don't open the lid while the water is heating. 5 Don't ... 8 Put the kettle on the stand - take care not to spill. .... To avoid environmental and health problems due to hazardous substances in electricaland electronic goods, appliances marked with this symbol mustn't be.Missing: code

Kettles - Russell Hobbs

en.russellhobbs.com > Our Products

Over the decades, Russell Hobbs has been at the forefront of quenching our national thirst for hot beverages with fast, easy to use, great looking electric kettles.Missing: open ‎question ‎enter ‎code

Russell Hobbs KE9000S Electric Kettle, Stainless Steel

www.amazon.com/Russell-Hobbs...Electric.../B00A15...

Amazon.com, Inc.Amazon.com: Russell Hobbs KE9000S Electric Kettle, Stainless Steel: Electric ...

Hi Naomi,
please check the manual.and see if it is has a small hole or opening in kettle to go to outside of steam.
your one must be blocked .
regards.
nuwan

I descaled my kettle because it needed to be done (it was quiet before I descaled). However, it has become noisy since I descaled. Any suggestions, most welcome?

Have you tried descaling the kettle? When scale builds up over the whisper quiet element, it reduces the effectiveness, and the kettle becomes noisy. Try 1 tablespoon of citric acid, fill the kettle to the max line, boil the kettle then leave for 10 minutes. Rinse and repeat if necessary.

Hi Bridget,
Here are a couple of sites where you can buy Russell Hobbs parts: http://www.viewpointdirect.co.uk/russell-hobbs-kettle-filter---for-13355-1764-p.asp http://www.twenga.co.uk/dir-Appliances,Appliance-spare-parts-458 Or you can contact them: [email protected]
Best, S

The coils of Russel Hobbs outrun the shell jar for sure as the corrosion in the kettle would have caused the leak.
The best can be to get the kettle welded with metal, use gas welding to mend up the leak and use a good grinding tool to polish off the suface.
Wash and clean/scrub well to remove all flux /dirt before you use it.
Boil water three times to discard before you use it.
You can continue to use the Hobbs.

I think you would only solve this problem by cleaning the thermostat contacts, or replacing the thermostat which wouldn't be worthwhile as it's likely to be cheaper to buy a new kettle.
Besides this , just getting into the kettle needs special 3 tongue screwdriver and then a certain technique to open it up without damaging the plastic parts. Im'e afraid its a throw-away world now and its not good .

buy a new one