Washing Machines Logo

Related Topics:

Question about Hoover Washing Machines

1 Answer

Hoover 2305L washing machine. Won't spin dry clothes.

Agitator spins but tub only rotates slowly.

Posted by Ken Johnson on

Add Your Answer

1 Answer

Lollo Pop

  • Level 2:

    An expert who has achieved level 2 by getting 100 points
    MVP:

    An expert that got 5 achievements.
    Governor:

    An expert whose answer got voted for 20 times.
    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 134 Answers

You have faulty transmission or/and clutch.
Clutch is on the bottom of the transmission , next to the pully.

Posted on Jan 11, 2019

5 Related Answers

Anonymous

  • 1294 Answers

SOURCE: Hoover washing machine not spinning

Possible your outlet filter is blocked, check this out first, then your outlet pump, and clean it; refer to your manual.

Posted on May 28, 2007

Anonymous

  • 1294 Answers

SOURCE: Washer spins but not enough to extract water from clothes or tub.

Check your exit hose spigot, it may be clogged. This is if your filter is all clean. There should be air for passage in the standpipe behind. Your hose should not fit airtight into the standpipe and neither too deep into it. Snaking out your standpipe would be good too.

Rate me pl.....if helped.

Posted on Dec 31, 2007

douglas smith

  • 1462 Answers

SOURCE: PAV2300AWW tub spin on wash cycle

fault may be tacho on motor fallen off or round magnet that turns inside the tacho coil has become unscrewed. remove motor and check tacho. it is located at opposite end to the belt pulley

Posted on Sep 07, 2008

Anonymous

  • 4669 Answers

SOURCE: as agitator washes, tub spins faster and faster

It has a bad brake assembly.

Posted on Mar 06, 2009

Anonymous

  • 3361 Answers

SOURCE: 110.82980 top load washer (kenmore) agitates when

The shift actuator in the gearcase is bad.
Replace the transmission.

Posted on May 15, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Hoover 2305L goes through all cycles well.does not spin fast enough to dry clothes.
how old is the 7 kg washing machine

should be direct drive to the drum not a belt drive

the motor could be wearing out

are you over loading
26191205-nyvzxzr0on2c1ljhmk1rzhzt-1-0.jpg
Read full answer
May 11, 2016 • Hoover Washing Machines
0helpful
1answer

GE Profile WPRE6100G tub spins while washing
My parent's Hotpoint did the same thing!! The brake on the bottom of the tub is not engaging! It needs replaced!!
Read full answer
May 15, 2012 • GE Profile WPRE6100G Top Load Washer
0helpful
1answer

Hoover 500M0AUS stops very frequently due to off-balance
Hi there.I'm guessing you changed the (Spin Brake Solenoid) underneath,it attaches to the brake arm,the solenoid retracts with a normal loud clunk & pulls the brake arm away..I think what is happening is the clutch spring inside that white plastic cog is not binding like it's supposed to & it's not taking the drum with it.so the agitator is spinning independantly without the drum.the clutch spring tightens in one direction for spin & loosens in the other direction for wash.either way i think your problem is in that plastic cog & clutch spring,the spring is inside that cog & hard to see.it can be repaired if your up to pulling the entire gearbox out to get to it.I hope this was helpful,it's kind of hard to explain by this method.cheers Chris
Read full answer
May 29, 2010 • Washing Machines
0helpful
1answer

My washer''s agitator spins but not the drum during spin cycle.
If you see the agitator moving, but not the tub..I guess, you have a defective transmission..this is tough without knowing a little more info.
Read full answer
May 20, 2010 • Maytag Legacy Series Top Load Washer
0helpful
1answer

Tub rotates while agitator is running.
BRAKE OUT OF TRANSMISSION
Read full answer
Feb 03, 2010 • Hotpoint Washing Machines
2helpful
2answers

Kenmore 90 tub spins excessively clockwise during wash cycle.
there should be 2 or 3 springs that hold it, they mite have broke, take off back panel an check.
Read full answer
Jan 04, 2010 • Kenmore 24032\24036 Top Load Washer
2helpful
1answer

Tub rotates CW during agitation, out of balance, hits side of metal cabinet, but no error code

Hello srcoray,

Did you replace the clutch, just trying to get a feel for your hands on experience with the machine? If you did the work did your machine use the upper roller clutch bearing along with the clutch pulley mounted roller clutch bearing?

The FAV6800AW uses a reversing motor and motor controller that powers the motor and clutch pulley to rotate CW in Wash/Agitate cycle and CCW in Spin Cycle.

In Wash/Agitate cycle the roller clutch bearing should rotate freely CW allowing the agitator shaft to drive the transmission in wash cycle driving the tumblers to rotate only not the wash basket. In spin cycle the roller clutch bearing will lock up (one-way roller clutch bearing) driving the spinner shaft to rotate the wash basket and transmission CCW. Unless my thinking is wrong it sounds like the one way roller clutch bearing is frozen or dragging and not rotating freely in wash cycle rotating the wash basket CW. I’m an owner like you and will try to help.

Just a few other questions;

If you have a load of wet clothes in the wash basket and you select Spin Only cycle will the spin cycle complete with out dc/UC errors?

With the lid raised can you rotate the wash basket CW? It should not; it should only rotate CCW and do that with very little resistance.

 Rich
Read full answer
May 22, 2009 • Maytag Neptune FAV6800AW Top Load Washer
1helpful
1answer

Agitator spins in one direction
The purpose of the upper portion of the agitator is to push the clothes in a downward motion. As the agitator moves the dogs grab and on the backward srtroke the top portion rotates a quarter turn. In the spin mose the agitator only goes in one direction or your clothes would be torn to shreads.As the washer rotates back and forth, the dogs grab the inner walls of the upper agitator and that forces the clothes into a downward movement to the bottom of the tub. These dogs will wear out. To test whether or not these are bad just grab the agitator while in wash mode. The dogs should advance the top portion easily. If not then they are worn out. To replace them you must remove the agitator and sit it on the floor. Hold the base down with your feet and yank the top upwards. After seperating the 2 pieces you simply install the new dogs and line up the bottom with the top being careful not to break the little tabs on the bottom agitator that hold the top in place.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Read full answer
Dec 22, 2008 • Kenmore 22422 Top Load Washer
1helpful
1answer

Hoover washing machine 550mb keep stopping on spin dry cycle.
Hi are the clothes tangled up around the agitator if so the gearbox may be faulty or the brake may be worn,is it washing in both directions
Read full answer
Oct 09, 2008 • Hoover Washing Machines
5helpful
3answers

Hoover750l
Please help
My Hoover 750 L Top Loader leaves a lot of fluff when I wash my dark clothes. I have been looking for a filter on it but no success. Any one have an answer please.
Read full answer
Sep 07, 2007 • Hoover Nextra HNF 3167 Top Load Washer
Not finding what you are looking for?

View Most Popular

Washing Machines

Related Question

Hoover 2305L goes through all cycles well.does not spin fast enough to dry clothes.

  • Hoover Washing Machines

Open Questions:

0answers

Hoover Dynamic Next washer dryer.start button won't work on 59 minute programme but works on other programmes. The "delay start" has not been activated.
Read full answer
Be the first to answer Aug 24, 2019 • Hoover Washing Machines
0answers

Model DYN 9166P-AUS. What does error code E17 indicate?
Read full answer
Be the first to answer Apr 23, 2019 • Hoover Washing Machines
0answers

Moel 10kg. What does error code E20 indicate?
Read full answer
Be the first to answer Apr 16, 2019 • Hoover Washing Machines
0answers

Optima. Why doesn't it spin? It drains but will not spin with or without clothes in it. I've checked the filter
Read full answer
Be the first to answer Mar 09, 2019 • Hoover Washing Machines

151 views

Ask a Question

Usually answered in minutes!

Popular Questions

I just opened my washing machine door after finishing a wash and there was smoke coming out of the door and a smell of burning. It is a Hoover model no HWB814D-80S.

Hoover Washing Machines

Hoover WMH168D error code E08

Hoover Washing Machines

Error code E11 on hoover

Hoover Washing Machines

How do I reset a e20 error code on my hoover washing machine

Hoover Washing Machines

Hoover washer dryer error code h01

Hoover Washing Machines

Top Hoover Washing Machines Experts

W.L.

Level 3 Expert

2511 Answers

Steve F

Level 3 Expert

1361 Answers

Mike

Level 3 Expert

4383 Answers

Are you a Hoover Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
DYN8164D.pdf. user-manual-Dynamic...

Hoover Dynamic...

PDF Manual
DYN_P_8KG_NL.pdf. user-manual-Dynamic...

Hoover Dynamic 8...

PDF Manual
Http://www.bigben.lv/Manufacturer_User...

Hoover AAA140 Front...

Loading...