Hi people can some one tell my what e5 means on a Hoover HL V8DG-80. I understand it an error code just need to know how to fix it.

Hoover suggests that the water fill valve(s) may be turned off. Error 2 means It cannot fill correctly according to their owners manual.

https://www.youtube.com/watch?v=3R_RYO6jSOs
E21. Canister fill pump triac faulty. Possible fault Wiring faulty; Electronic board faulty.
https://www.how-to-repair.com/help/e21-e22-error-code-tumble-dryer-pump-fault-aeg-electrolux-zanussi-etc/

Control board fault. See... https://www.espares.co.uk/advice/careandmaintenance/how-to-fix-an-e15-error-on-a-hoover-washing-machine

An E16 error code means there is a heater insulation problem which could cause the tripping of your fuse box and other random cycle errors, but it's hard to prove without the replacement of your heater.

For more information on other error codes , watch this video .

http://www.espares.co.uk/advice/0/2531/how-to-understand-hoover-and-candy-washing-machine-error-codes

Hi friend, I appreciate your post!

I understand that your Electrolux refrigerator is showing an "E5" error code and not cooling. "E5" typically stands for Showroom mode, you can press and hold the "Up" and "Down" keys simultaneously and that should restart your refrigerator back to normal operation. Could you reply back if that corrected the issue? Thank you. -Matt

The error code E5 shows that your colour cartridge is finished and the printer is telling

Read more: How to clear error code e5 - What does it mean when my mp210 canon printer has the alarm on :: Extreme Cow Answers at http://www.extremecow.com/How_to_clear_error_code_e5-qna9448.html

Hope it helps

--N

key permanently stuck, remove the keypad connector cable. Restart the power up sequence, if the error disapear the keypad is the cause.
otherwise the PCA is the cause. the chip PCA must be changed.

God bless you

Hum....e5 error.

The truth is...there is no solution for e5 error.
U may see some solutions through web, however, non of them works..

The only way you can get out of e5 error, replace with new cartridge..
or...
prevent it...before you face it!!

How?
Whenever you take out the cartridge from printer, make sure unplug the power code first..
and then take and refill or whatever...

And then when you put it back....do it when power code is unplugged as well.

Personally, I refilled and used CL831 more than 8 times..

If you would like to save money, try refill kit by "ROADINK".
Not only they are easy, but also the printing quality is good.
For your better understanding pls check out my youtube video.
And will see how easy ink refill can be done.

hi I had this fault, google said it was tachometer fault. the e08 fault on my hoover optima was not the tachometer, i checked it, but the fix was very easy, the motor brushes were worn out and i changed them for 10 quid, I made a video of it its on youtube http://www.youtube.com/watch?v=xYn-f78GB4U and it shows you how to test the tacho and how to change the brushes, hope this helps someone