Question about Dacor Ovens

Open Question

My Dacor double wall oven panel shows L70 comm error and keep alarming, do you know just how to erase the alarming

Posted by hai zheng on

Ad

5 Related Answers

SenorSushi

  • 1 Answer

SOURCE: dacor cps130 wall oven f1 error

According to the manual, this is an element relay circuit failure. Call the tech.

Posted on Jun 15, 2008

Ad
reg501

Richard

  • 413 Answers

SOURCE: F1 error Dacor Oven

I'm sorry but I am not familiar with Dacor ovens, the research I performed indicated that the ERC (clock module) has failed. You could try the oven sensor probe if it is a temperature related issue.
I truly wish I could help you further with your dilemma but am unable to provide any further information except search the web. Good luck....

Regards;
reg501

Posted on Jul 02, 2008

Ad
localwonder

Michael Masters

  • 6784 Answers

SOURCE: Dacor error codes

HI. the F-1 code is a System Watchdog Circuit failure code.

Press "Cancel", if beeping continues after 30 seconds, replace the main control board (also called clock or ERC).

Concerning the F-5 code. This is an oven temp sensor failure code. have it replaced asap. ((Check the wiring leading to and from the control and sensor for cracks and fouled structure. if the wiring is bad, replace the harness as well)),

Posted on Aug 01, 2009

Anonymous

  • 3 Answers

SOURCE: Dacor double oven, lower oven works fine, upper

I had the same problem after auto-cleaning my oven just before Thanksgiving. The cause was overheating...and the tripping of a heat sensor switch.

The switch (reset button) is located about 3 inches behind the door locking mechanism.

Removing the front panel (4 screws) that the door lock sticks through exposes the switch. Just push the little red button & your are back in business!!

Posted on Nov 27, 2009

Anonymous

  • 572 Answers

SOURCE: oven seems to work but the display panel dark.

need to replace item #2m0512003-00001.png

Posted on Feb 11, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Dacor oven keeps beeping and flashing PRB. How do I stop the beeping?


Most unwanted beeping on Dacor products are due to a bad touchpad... Use your model # and start looking for a replacement , by touchpad I mean a part something like this one: Dacor Touchpad 62678B

Jul 12, 2016 | Dacor Epicure 30" Double Wall Oven,...

1 Answer

How do I find the model number on a dacor double wall oven?


The MODEL Series you already said in your question: EO230SCH

Check and see if it is this model:


v4ndre_1.jpg
Good Luck!

Dec 06, 2010 | Dacor Epicure 30" Double Wall Oven,...

1 Answer

Display panel works, but oven will not come on


I take it the oven will not heat. there is a safety thermo inside the grilles. it can be reset.. turn the power off at the breaker... remove the grille..inside of the door. then look inside the thermo is has two wires going to it and a red button in the middle.. push the red button down it will reset the thermo with a click... replace grille and restore power... hope it helps.. replace grille

Sep 19, 2009 | Dacor Epicure 30" Double Wall Oven,...

1 Answer

Dacor single oven flashes an F2 error code and won't stop beeping!!!


This is from manufacture service manual:

-F2- Alarm Heating Mode High Temperature
Is activated when the ERC senses a runaway heat condition or when the temperature exceeds
“runaway limits”. The ERC will beep until the cancel or another function is selected. If the alarm
repeats the F2 alarm check the oven sensor and wiring after fi rst checking for a stuck relay. If alarm
goes away verify the oven will complete a clean cycle without any type of failure.
Another words the problem with oven sensor or relay board.

I’m happy to help further over the phone at https://www.6ya.com/expert/vitaliy_f406165329c75ede

Oct 26, 2008 | Dacor MCS130 Millennia Electric Single...

1 Answer

Dacor ECS230 Epicure Electric Double Oven


You probably tripped a safety thermostat in the back of each oven. If you turn off the breaker and find a way to pull the units out you could probably remove the rear panel and reset the thermostat by pushing in a button on the back of the open thermo. Some thermo's aren't resettable though so you'd have to buy a replacement.

Sep 22, 2008 | Dacor ECS230 Epicure Electric Double Oven

1 Answer

Control panel fan won't turn off


Is the oven still hot?? this is a Electronics cooling fan it will run even after the oven is turned off give it some time it should shut off let me know if not

Jan 26, 2008 | Dacor Epicure 30" Double Wall Oven,...

Not finding what you are looking for?
Ovens Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dacor Ovens Experts

Paul Bade

Level 3 Expert

1666 Answers

Vincent G
Vincent G

Level 3 Expert

2363 Answers

ray gallant

Level 3 Expert

69189 Answers

Are you a Dacor Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...