Question about Polaroid Televison & Video

1 Answer

I changed panel type in service menu now my tv comes on and does nothing. Ive tried resetting by unplugging. Any button combos ive tried have done nothing. No manual and no info to be found.

Polaroid 32in 32t2h led smart tv 2018

Posted by Tina Reed on

Ad

1 Answer

David Sampson

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Expert
  • 48 Answers

How long have you unplugged it for most TV's have a battery back up which you will have to wait for it to power down after unplugging could take up to 24 hours they do this to keep settings in case of a power cut

Posted on Jan 03, 2019

Ad

5 Related Answers

Anonymous

  • 1 Answer

SOURCE: remote control not responding

Perhaps you can try what I do when my KV24FV300 runs through channels and will not stop.  Hard to watch and remote will not work.  Nothing works but on and off from set. 

Sony Says:  Take all batteries out of ALL remotes that you use in any way for that set, VCR, etc.  ALL batteries out.  Turn TV off at set.  Unplug TV.  Wait at least 15 minutes then replace all batteries in ALL remotes.  Plug TV back in and turn TV on from set.

Maybe, just maybe it will work.  If it does not work why not call Sony, they always say that cannot happen but they have a solution for it.

[email protected]

Posted on Oct 26, 2007

Ad
Slinteriors

Sonny Berry

  • 8617 Answers

SOURCE: green power light will not stop flashing and tv will not turn on or off

You need to replace the 1000uf capacitors on the DM board thats the classic symptom of the DM caps being bad the light continues to blink repeatedly. If you need more info on the repair let me know.

Posted on May 16, 2008

Anonymous

  • 188 Answers

SOURCE: HOW CAN I RESET THE V CHIP TO UNBLOCK ALL THE RATINGS

Try this procudure from the manual.

Notes (for TV RATING and MPAA RATING):
● You cannot access the setup menu when the
“PROTECTED PROGRAM by ...” message
appears. Move to an unblocked channel
before you hit [MENU].
● When you select a rating and set it to
[BLOCK], the higher ratings will be blocked
automatically. The lower ratings will be
available for viewing.
● When you set the lowest rating to [VIEW],
all other ratings will automatically be available
for viewing.
V-CHIP SET UP
MENU
To exit the menu
4
[CHANGING THE

Posted on Oct 05, 2008

Anonymous

  • 1 Answer

SOURCE: Recieving "Locked" display message but don't know how to clear it. No reset switch or panel lock button

I have the manual and it is called "child lock" go figure it stumps us adults. Anyway...holding the power button down for approx. 8 seconds can toggle this feature on / off

Posted on Dec 20, 2008

SD Tech

SD Tech

  • 14553 Answers

SOURCE: i have a ws-65613 and the green light keeps flashing

ONLY 1 or 2 things can cause this problem----First thing to do is remove front speaker grill--it pulls out and secured with plastic pegs--behind it you will find an inspection plate---Notice the one or two pairs of wires coming from the front keyboard2.gif of the set---remove the inspection plate and follow the wires to the right--you can unplug both plugs(most have two and they are marked with letters and different sizes so you cannot get them wrong)

The idea here is to remove the front keyboard2.gif with its reset button etc from the circuit---You will still be able to try to turn the set on with the remote---these sets have a Receiver(large metal box to the left as you look from the back) and if the power goes out the green light will blink for about 70 seconds and then go out---it is the Receiver booting up.

If disconnecting the keyboard allows the set to turn on--you have a bad reset switch and two choices---either operate the set only with the remote or to remove the front screen and get at the reset switch (it is tiny) and remove and or replace it.

If disconnecting the keyboard does not restore the set to operation---the receiver is bad---there are 4 or more caps and some pico fuses that can fail in that unit---Mitsubishi no longer sells or repairs these--if it is bad and not the caps there is a company you can send the unit to and have it repaired--if you need to know their name let me know---you can call them and get a quote for repairing the receiver.

SD Tech

Posted on Sep 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 32in Vizio Smart TV, how do I program it to have a channel 03 so I can hookup an older VCR. I already have a DVD player hooked up to its Red/Yellow/White A/V connectors. Thank you very much for...


If you don't have more entries, you could try to use a SCART switching box. This is one, but there are many others. There are also connectors going from scart to R / W / Y and vice versa.
25574435-m1vkig3zsqigira5v5ftz33l-4-2.png

Mar 15, 2015 | Vizio 32in Class LED Smart TV - VUDU...

1 Answer

Can I default my 32in vizio tv. I am stuck in spanish and want to go back to english?


select MENU on your tv remote.
choose settings
select language
Choose English

Apr 25, 2014 | Vizio M320NV 32in 1080p LED HDTV and Mount

1 Answer

I was given a 32in Polaroid tv, the model # is TLX03210B, I need a remote and a manual. calling the 888# should be able to help me.


Try polaroid website itself to down load and print it ur self,if ur tv model still in the market.Or call their customers service phone number pay a fee.They'll sent it to u.Try website like Remotes.com to buy an original remote.

Mar 22, 2011 | Polaroid 3211TLXB 32 in. LCD Television

1 Answer

My 32In hdtv from 2007 turns on just fine then flashes polaroid and doesnt respond after that. Wats wrong?


My 32in hdtv turns on, flashes Polaroid and shows there is no signal then turns off, what could the problem be?

Jun 12, 2010 | Polaroid FLM-3232 Television

2 Answers

My 32in polaroid tv completely lost power/no indicator light, totaly no power


Please use the following link for a possible repair....

http://www.ohmsupplies.co.uk/epages/62027733.sf/en_AU/?ObjectPath=/Shops/62027733/Products/REP76

Apr 05, 2010 | Polaroid TDA-03211C 32 in. LCD HDTV

1 Answer

Having problems getting signal when hooking up our Polaroid 32in HDTV to computer to use as monitor


Are you using a video cable or the s series. Can you use the Polaroid as a monitor? Remember you do have to tell the monitor to be a TV.

Aug 01, 2008 | Computers & Internet

2 Answers

Polaroid, 32in, HD LCD.


32 flat panel polaroid will not turn on

Oct 02, 2007 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76352 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

CoppellTVRepair.com

Level 3 Expert

778 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...