Question about American Standard Heating & Cooling
Sounds like the gas has low pressure.
Did he pressure test it?
Posted on Jan 02, 2019
SOURCE: Changing Thermostats
This is one where you will need a good control man or woman. The American Standard ASYST system is not intended for the homeowner to change out. It has a room sensor wire that others do not account for.
Posted on Jan 16, 2008
Check the data information on the unit there should be a troubleshooting guide that tells you what the two lights blinking once means. hope this helps.good luck. normally found with schematic
Posted on Feb 12, 2009
The Thermostat Wizard is an interactive tool that will guide you through wiring and troubleshooting your thermostat, as well as programming it to the most comfortable settings for you and your family. Simply answer the questions from the Thermostat Wizard to correctly connect, troubleshoot and/or program your Honeywell Thermostat. You can even print the instructions and bring them right to the thermostat to help make things easier.
Go to: http://yourhome.honeywell.com/Consumer/Cultures/en-US/Support/Thermostat+Wizard/
However - the problem is probably not with your thermostat but with your furnace. It is most likely a dirty flame sensor - a maintenance issue. If you have not had your furnace serviced recently (more than 1 year) that is where you should start. Modern furnaces require regular maintenance.
Please rate my answer!
Posted on Mar 12, 2009
sounds as if the heater coil itself is burnt out. These coils may be repaired if you can get an universial coil repair kit and rewire the heater coil yourself. Since the age of the unit is in question I don't know if it is possible to get a kit for repairs but you never know. I would check an a/c supply house for this kit. Good Luck on your repairs
Posted on Nov 03, 2009
Testimonial: "The Solution was one worth considering and helpful in further troubleshooting. Problem turned out to be the elecronic circuit board."
rinnai has a technical bulletin out on this condition #28. It instructs the technician to adjust the gas pressure. You can get a copy of this bulletin by contacting rinnai at 800-621-9419 (US). or at rinnai.us
Posted on Feb 02, 2010
Tips for a great answer:
Mar 26, 2018 | American Standard Heating & Cooling
Jan 06, 2015 | Heating & Cooling
May 21, 2014 | Goodman 3 Ton 14 ee Goodan Heat Pump...
Sep 13, 2012 | American Standard Heating & Cooling
Mar 05, 2011 | American Standard Heating & Cooling
Jan 02, 2011 | Heating & Cooling
Dec 08, 2010 | Honeywell Programmable Thermostat Heater
Aug 02, 2010 | Heating & Cooling
Dec 06, 2009 | Ruud UAMB042 Air Conditioner
Feb 28, 2009 | Honeywell Electronic Programmable...
43 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: