Need an electrical cord for my Steam Chef Stackable Whole Meal Cooker

Question moved from Misc Category.

Model 21650 doesn't exist

https://www.google.com/search?q=Westinghouse+CT+Chef+SA21650

I think you mean 21950?

https://www.ebay.com/itm/154468079546

Which leads us here

https://www.google.com/search?q=CT+Chef+SA21950+manual

This appears to be the closest

https://insightgadget.blogspot.com/2012/08/westinghouse-sa21950-counter-top-chef.html

..

get extension lead plug lead from cooker into it do not plug into socket that you usually plug cooker into try another switch on if it still cuts out means fault is with cooker lead and electrics. if you can open plug check wires have not come loose. other than that you must get an electrician!

Hello, Here is website for manual and recipes: Presto Instruction Manual Downloads

The valve should be seat to sealing. When the cooker is coming up to pressure it is normal for the steam to push oxygen out of the valve. Then, once it has reached pressure and the cooker starts to count down the cooking time the steam will stop coming out.

http://www.hippressurecooking.com/recent-forum-posts/

When the cooker is reaching pressure, the valve should point to the dot, and after pressure cooking, you turn the valve towards release. The valve will feel quite loose, but it if it's in the wrong position when the cooker is reaching pressure then the cooker cannot build, and consequently will not release, pressure.

Here is the manual if you need more information on how to operate the cooker:
http://www.hippressurecooking.com/t-fal-emeril-lagasse-electric-pressure-cooker-manual/

Upon reading up on your model i severely doubt that it has a battery. The most common problem with cookers is a thermal cutoff failing. The review site where i read up about your model had one person who only used their cooker twice before it failed. If your clock is out then maybe your power problem may be closer to the cord than that. Perhaps your cord is not good. Only a continuity tester (multimeter on resistance setting) will tell for sure.

Check that there is sufficient ventilation from the cooker area and that the fan is working (if there is one), Sometimes a piece of insulation may become displaced and block the louvres and then the steam concentrates in the electrical circuits and shorts to earth. Even insufficient space behind and around the oven can create this problem. If the latter is the case, an additional extractor fan may be a solution.

The most likely reason they don't fit together perfectly right is because, when I bought the Sunbeam Instant Steamer Model 4710, it only came with 1 steaming tray.

Call Hamilton Beach. This crock pot was recalled because of threat of severe burn. My handle broke and I dropped my lid. When I called to buy a new lid, I was told of the recall. They will send you an envelope. You then send back the end of the cord. I got a whole new cooker, crock and lid in the mail. : )