Question about Mitsubishi Televison & Video

Open Question

I have a Mitsubishi HD 1080 series WS-55313 trouble shooting codes is one blink then two blinks it repeats five times it means no error why isn't it still powering on

Posted by Steven Carson on

Ad

5 Related Answers

Slinteriors

Sonny Berry

  • 8617 Answers

SOURCE: Mitsubishi turn on then turns off

Your model has the V22 chassis when it blinks a 21 cide which is what yours is indicating that maens the set is shutting down due to xray protection. Which means a votage is raising which trips the xray protection circuit and keeps your set from operating
1. SELF- DIAGNOSIS INDICATE X-RAY. CHECK FOR PROPER SEATING OF CONNECTIONS TO AND FROM THE HIGH VOLTAGE BLOCK. 2. SELF- DIAGNOSIS INDICATE X-RAY. CHECK FOR A SHORTED IC5A03 PART # 270P704010 AND AN OPEN R5A73 82K ¼ WATT OFF PIN 2 OF IC5A02 ON THE MAIN PCB. 3. SELF-DIAGNOSIS INDICATES SHORT PROTECT. CHECK FOR A SHORTED IC4B01 PART # 270P261020 (VERTICAL OUTPUT) LOADING 24-VOLT SUPPLY LINE. LOCATED ON THE MAIN PCB.

Posted on May 09, 2008

Ad

Anonymous

  • 1142 Answers

SOURCE: Mitsubishi WS-55857 won't turn on

Thank you for posting your concern details however i would be needing few more details from your side if necessary and allow me few mins to come up with the resolution.

Posted on May 19, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: i have a mitsubishi 1080 series wt-42311 model

i have a mitsubishi 1080 series WS-65315 model i power it on and led light turns off after 2 seconds

Posted on Oct 18, 2009

ArnelM

Arnel

  • 184 Answers

SOURCE: Green light comes on then goes right back off.

The TV indicates an error code 22 (short circuit protection). Check 2 STK392-570 convergence IC for shorts and 5amps pico fuse for open. I usually replace both STK's.

Posted on Dec 26, 2009

SD Tech

SD Tech

  • 14553 Answers

SOURCE: Mitsubishi ws-65809 powers on for 2 seconds.

2,2 error code is short protection---98% of the time it means one of the two soldered in pico fuses this set uses is blown----there are several---but your problem means if it is ws-65809 one of the two stk-392-570 convergence chips has failed.

I will attach a photo---they are on the middle circuit board and the two to the right are for convergence--both are green and 5 amp--with the set unplugged check both of them like any fuse--no reading means bad.

If you find this--I HAVE START TO FINISH, STEP BY STEP INSTRUCTIONS FOR THIS REPAIR IN THIS SET--SHOPS WILL GET 300 or more but you if you can do it yourself buy everything you need for under 40 dollars--I can tell you the best place to get the chips, fuses, etc.

If you want the instructions let me know and I will post them here for you---they are based on my own actual experience doing this repair in this kind of set hundreds of times.

If this information helped you rate this solution as I do this here for free.

SD TECH

48bb479.jpg

Here is a photo of what the two chips look like--The one in the picture says 392-560 but yours uses two that look just like it--STK-392-570.

5f1988c.jpg

Posted on Dec 28, 2009

Testimonial: "SDTECH provided me the information I've been seeking for the past 2 years, and he did it the same day as I posted the problem. YEA!!!!!!!"

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Every time I turn my HD 1080 series Mitsubishi on 2 1/2 seconds later it turns off by itself

ok, a model number would be helpful but:

when set turns off and green power light goes out: on the front of the set press and hold both the menu and input (device) buttons at the same time for at least five seconds and let both go.

Power light will blink a two digit error code like 2 blinks, 2 blinks, a pause and repeat it for a total of 5 times.

This is the error code and indicates where the problem may be---let me know what code you find and I will tell you what it means.

SD TECH
0helpful
1answer

Mitsubishi big screen HD 1080 series model WS-55809. it switched off one day. and when i turn it back on it switches right back off. red light in front. what part do i need to fix it/

That model does not have a red light---Green.

If set powers up for a few seconds (green power light) and goes out do the self check the model indicated has:

On front of set (not with remote) press and hold both the input and menu buttons for at least 5 seconds and release both.

Green power light will blink a two digit error code like 2 blinks, 2 blinks a pause and repeat it several times.

Let me know what error code you find (if you have unplugged the set that will clear all errors and you have to plug it in and try to turn set on again---when it fails do the self check)
1helpful
2answers

[email protected] have a Mitsubishi hd 1080 series and the power button goes off as soon as you turn it on. How can I fix this?

The set has a self check feature: when green light (power) goes out on the front of the set press and hold both the menu and input buttons at same time for at least five seconds and release both.

Power light will blink a two digit error code like: 2 blinks, 2 blinks, a pause and repeat it several times.

If the set was unplugged you will have to try to turn it on and then do the check.

2,2 is short protection and usually means (98%) convergence problem.

1,2 is no error detected etc.

Let me know what you find and I will help.

SD TECH
0helpful
1answer

Our WS-55313 Mitsubishi Projection screen tv was on then just died. When we push power button or remote on, the green power light comes on for a couple of seconds then the tv goes off .

do the self check this model has.


When green light goes off press and hold both the input and menu buttons for five seconds and release both buttons.

The power light will blink a two digit error code like, two blinks, two blinks, a pause and then repeat it several times.

let me know what the error code you find is and I will let you know what it means.


SD TECH
0helpful
1answer

I have a Mitsubishi hd 1080 tv and last night it stop working it wont turn on or off please help

IF POWER LIGHT COMES ON AND THEN GOES OFF:
DO THE SELF CHECK THIS SET HAS: ON THE FRONT OF THE SET PRESS AND HOLD BOTH INPUT AND MENU BUTTONS FOR AT LEAST 5 SECONDS AND RELEASE BOTH.

POWER LIGHT WILL BLINK A TWO DIGIT ERROR CODE LIKE: 2 blinks, 2 blinks, a pause and then it will repeat the code 4 more times.

Let me know if you get a blink code and I will tell you what it means.

If this information was helpful, rate this solution as very helpful as I do this here for free.

SD TECH
0helpful
2answers

Mitsubishi WS-55805 turns off before it is completely on

please do the following:

When green light comes on and then goes off, ON the front of the set press and hold BOTH the Menu and Input buttons at the same time for at least 5 seconds and release both buttons.

Power light should blink a two digit error code; most common is:
2 blinks, 2 blinks, a pause and it will repeat the error for a total of five times.

Let me know what error you find and I will tell you what it means.

If this information told you something you did not know, rate this solution as very helpful as I do this here for free.

SD TECH

1helpful
1answer

Mitsubishi model WS-55313 worked before we moved to another house, now it turns on for 2 seconds and then shuts offwhat can I do?

DO self check this model has.

When power light goes off, on the front of the set push and hold BOTH the menu and input buttons for 5 seconds or longer and release both.

Power light will blink a error code--like 2 blinks, a pause and 2 blinks and will repeat it 5 times.

Let me know the error code and I will tell you what kind of trouble you have.

SD TECH
11helpful
2answers

Mitsubishi hd 1080 will turn on for 3 seconds and then shut off. Help...

The model you have selected: WS-55805 should have a self check feature: when you turn it on and the green power light goes off: ON THE FRONT OF THE SET PRESS AND HOLD BOTH MENU AND INPUT together for at least 5 seconds and then release both buttons.

The power light should blink a two digit error code: for example: 2 blinks, a pause and 2 blinks--it will repeat the code about 10 times.

error codes for this set:

1, then 2 no error detected
2, then 1 X-ray protection
2, then 2 short protection
2, then 3 deflection circuit problem
2, then 4 vertical deflection problem


2, then 2 is the most common and easiest to fix.

Let me know what you find and if 2,2 I have detailed instructions for repairing that kind of trouble.

I am here to help people.

SD TECH
2helpful
1answer

Mitsubishi Model # WS 65311 HD 1080 turns on then shuts off.

try holding in the menu and input/device buttons on the front of the set both together and see if it blinks a series of blinks, pause briefly then blinks a second series of blinks, let me know what the blinks were sush as 22 or 24
Not finding what you are looking for?
Televison & Video Logo

Related Topics:

69 views

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76823 Answers

Ekse

Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6393 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...