Question about The Office Equipment & Supplies
Hi, It is possible that 1 or more of the drum cartridges are bad. Change 1 cartridge at a time and see what happens. Also try to turn printer off for 5 minutes and turn back on.
Posted on Dec 28, 2018
the printer is sensing that one of the motors are not turning.remove the cover from the left side .you will find the main drive motor,next to the motor you will find a sensor clean this sensor with some electronic board cleaner .be sure that the sensor it dry before turning the printer on.
Posted on May 10, 2010
i have many times working on this printer and i always experience this problem...i think this problem is disalignment of the main gear...check the gear if its on the alignment and its work for me and the problem never comes back
Posted on Oct 19, 2010
SOURCE: hi, i have problem with
59.XY A printer motor error has occurred.
(X=C=developing disengaging motor rotation error)
Developing disengaging motor error
1. Reconnect the connectors J16 for the developing disengaging motor and J1100 for the DC controller PCB.
2. Replace the developing disengaging drive assembly.
3. Replace the DC controller PCB. Calibrate the printer after replacing the DC controller.
Posted on Jul 29, 2011
Tips for a great answer:
Usually answered in minutes!
Step 2: Please assign your manual to a product: