Can I change my departure date to next day and change my tucket

It's a mechanical movement and takes time, to fall into place ,

Are you asking about an airline flight? A bus? A train? A boat? Please contact whatever carrier you've scheduled the departure with to see whether they can change your itinerary.

Pull the stem out to the time set level. Turn the hand around until the date change. Now push the stem back in, pull to date set level and change to current date. Now the watch is at midnight for that current date. Note you can set to current time of day. The Watch will automatically change to correct date for next day at midnight as it should.

turn it 12 hours forwards or 12 hours backwards that will correct it to the right date change

You Gotta Send it in... call walmart warranty people...

Location Date Local Time DescriptionWhat's This? MURFREESBORO, TN, US 03/17/2010 9:33 A.M. DELIVERY
03/17/2010 4:06 A.M. OUT FOR DELIVERY
03/17/2010 2:51 A.M. ARRIVAL SCAN NASHVILLE, TN, US 03/16/2010 10:30 P.M. DEPARTURE SCAN
03/16/2010 7:07 A.M. ARRIVAL SCAN HODGKINS, IL, US 03/15/2010 7:56 P.M. DEPARTURE SCAN
03/15/2010 2:08 A.M. ARRIVAL SCAN SAN PABLO, CA, US 03/11/2010 3:25 A.M. DEPARTURE SCAN SAN PABLO, CA, US 03/10/2010 11:49 P.M. ARRIVAL SCAN MARYSVILLE, CA, US 03/10/2010 9:43 P.M. DEPARTURE SCAN
03/10/2010 4:26 P.M. PICKUP SCAN US 03/04/2010 1:00 P.M. BILLING INFORMATION RECEIVED Tracking results provided by UPS: 03/17/2010 2:08 P.M. ET

yep, you gotta send it in...

Location Date Local Time DescriptionWhat's This? MURFREESBORO, TN, US 03/17/2010 9:33 A.M. DELIVERY
03/17/2010 4:06 A.M. OUT FOR DELIVERY
03/17/2010 2:51 A.M. ARRIVAL SCAN NASHVILLE, TN, US 03/16/2010 10:30 P.M. DEPARTURE SCAN
03/16/2010 7:07 A.M. ARRIVAL SCAN HODGKINS, IL, US 03/15/2010 7:56 P.M. DEPARTURE SCAN
03/15/2010 2:08 A.M. ARRIVAL SCAN SAN PABLO, CA, US 03/11/2010 3:25 A.M. DEPARTURE SCAN SAN PABLO, CA, US 03/10/2010 11:49 P.M. ARRIVAL SCAN MARYSVILLE, CA, US 03/10/2010 9:43 P.M. DEPARTURE SCAN
03/10/2010 4:26 P.M. PICKUP SCAN US 03/04/2010 1:00 P.M. BILLING INFORMATION RECEIVED Tracking results provided by UPS: 03/17/2010 2:08 P.M. ET

mcdevito75 here, Your stem has 1 positions to set the date easily without haveing to cycle the watch 60 times. First pull the stem out to set the day, set the day 1 day before the day you want, next, push the crown back in, NOW! Slip a finger nail just under the crown from the back as there is more room, it may take some practice so be patiernt and gently, gently lift the crown to it"s first position, once in it"s first position turn the stem and see the DATE change, set the DATE to 1 DATE before the DATE you want, NOW pull the stem out to set the day date and time of day. Your watch is set and the day date will change on time, a little past mid nite.

Norstar Merdian Press Feature.
Enter "**8463".
Enter the password (default is 266344). The display shows
Hour: 01
Next Change
Select CHANGE. Display shows:
Hour: __
Cancel
Enter two digits for the hour. Chose AM or PM when Prompted.
Select NEXT.
The display shows:
Minutes: 00
Next Change
Enter the minutes.
Press the RLS button to end, or press NEXT to change the date.
The diplay shows:
Year: 99
Next Change
Enter the two-digit year.
Select NEXT and repeat to change the month and day.
Press the RLS key to save the time and date and exit programming.

Top of Page

Norstar Meridian CICS Time

• Press "FEAT".
• Press "*".
• Press "*".
• Press "266344" (CONFIG) or "23646" (ADMIN).
• Enter password "23456" (ADMIN) or "72787" (SCPLUS).
• You will see "Terminals & Sets".
• Press "Next" five times.
• Press "Show"
• When you see "Hour", press "Change" or "Next" to skip.
• Type in the hour using military time as a 2 digit number.
• Press "Next".
• When you see "Minutes", press "Change" or "Next" to skip.
• Type in the minutes using a 2 digit number.
• Press "Next".

Date:

• When you see "Year", press "Change" or "Next" to skip.
• Type the year in 2-digit format.
• Press "Next".
• When you see "Month", press "Change" or "Next" to skip.
• Type the month in 2-digit format.
• Press "Next".
• When you see "Day", press "Change" or "Next" to skip.
• Type the day in 7-digit format.
• Press "Next".
• When you see "End of List", Press "Rls" to exit.

Top of Page

Nortel Norstar Telephone Systems Changing the time on a Norstar system must be done using a display phone. Using a M7310 or T7316 the right 2 buttons under the display are "NEXT" and "SHOW" respectively.

1. To enter programming mode press "FEATURE" and "* * 2 6 6 3 4 4"
2. Enter password (default = 266344) - display should read "Terminals & Sets"
3. Press "NEXT" 5 times - display should read "Time and Date"
4. Press "SHOW" - display should read "Hour:___"
5. Press softkey "CHANGE"
6. Enter hour - display should read "AM OK or Change"
7. Select AM or PM
8. Press "NEXT" - display should read "Minutes:___"
9. Press softkey "CHANGE"
10. Enter minutes
11. Press "NEXT" - display should read "Year:___"
12. Press softkey "CHANGE"
13. Enter year
14. Press "NEXT" - display should read "Month:___"
15. Press softkey "CHANGE"
16. Enter month
17. Press "NEXT" - display should read "Day:___"
18. Press softkey "CHANGE"
19. Enter day
20. Press "NEXT"