HOW DO I RESET THE PO ERROR CODE ON MY KITCHENAID REFRIGERATOR MODEL # KRMF706ESS01 ?

Vacuum all the condenser fins of fluff and dust. Disconnect from the mains supply for 10 minutes.

Google

make model manual

and look in the troubleshooting section.

This may help you, replace a capacitor.

https://www.applianceblog.com/mainforums/threads/kbls36fkx02-kitchenaid-built-in-working-fine-but-beeping-over-and-over.48650/

Call for Service - Built In Refrigerator - Product Help ' KitchenAid

producthelp.kitchenaid.com > Built_In_Refrigerator > Other
Dec 14, 2019 - If the "Call for Service" light is blinking or flashing, try resetting the power to the unit: Power unit down by turning off the circuit breaker(s) for five (5) minutes. Power unit up by turning on the circuit breaker(s). Monitor the refrigerator for a couple of minutes to ensure the error code does not display again.

Service & Support ' KitchenAid

www.kitchenaid.ca > en_ca > service-and-support

Virtually hold your place in line or schedule a call back. Note: Scheduled callback is also available outside of operating hours. Check out more resources below.

FIXED - KBLS36FKX02 KitchenAid Built-In working fine but ...

www.applianceblog.com > ... > KitchenAid

Jan 7, 2015 - We have a KitchenAid built-in KBLS36FKX02 that started beeping every few ... I called KitchenAid to see if I could schedule an authorized repair ... So... the fridge is working fine -- the only issue is the constant beeping. Is there ...

..

Hi Brett,
When the Haier refrigerator shows an error code, try this before replacing any parts or taking the refrigerator apart...
- Power the Haier refrigerator OFF for 10 minutes, then power back ON. (Unplug the refrigerator for 10 minutes) -
The error code may disappear after a reset is completed.
- If after removing power to the refrigerator in an attempt to reset, the error code comes back,the freezer fan is bad and need to be replaced.
Here is a link to Haier Parts.
Also make sure there is No Recall on your particular model or serial.
Best of luck,
JP

https://www.haierappliances.com/parts

For the Kitchenaid KRFF507ESS01, to clear the power outage indicator (blinking "PO"), press the Measured Fill button on the key pad. That is the right-most button below the screen.

The manual for this refrigerator is available at Sears Parts Direct on the product page: https://www.searspartsdirect.com/partsdirect/user-manuals/krff507ess01-kitchenaid-parts-manual . The current link to the manual is https://c.searspartsdirect.com/mmh/pd_download/lis_pdf/OWNM/1507129L.pdf . See page 21 of the manual for information on the power outage indicator. Look in the right hand column. The manual is also available from Kitchenaid on the product page: https://www.kitchenaid.com/major-appliances/refrigeration/freestanding-refrigerators/freestanding-french-door/p.26.8-cu.-ft.-36-inch-width-standard-depth-french-door-refrigerator-with-exterior-ice-and-water.krff507ess.html . Scroll down (or use the link) to the Manuals & Guides section. Expand the section by clicking on the +. The direct link to the manual is https://www.kitchenaid.com/content/dam/global/documents/201504/owners-manual-W10772325-RevA.pdf .

I hope this helps.

Cindy Wells

PO stands for Power Outage. The fridge lost power for some reason. On my fridge I just hit "acknowledge" and it goes away. I don't own a whirlpool. Here's a page that lists different instructions for multiple different fridges in order to reset everything and turn off the PO light. http://removeandreplace.com/2016/02/02/refrigerator-display-panel-is-blank-not-working-how-to-reset/
Refrigerator Display Panel Is Blank Not Working How To Reset

Samsung Blinking Dash/Line Error Code List - Parts Dr

https://partsdr.com/blog/samsung-blinking-dashline-error-code-list/

Jul 16, 2011 - Indicate Error when the temperature sensed by Refrigerator sensor is .... My model required holding the super freeze and super cool buttons, but it worked! ... My display said S and E after a power outage I pressed energy .... I had that 5 E error code after a brief power outage... thank you for the resetting ...

Samsung Refrigerator Troubleshooting Self Diagnostics ...

www.appliancerepairlesson.com/.../samsung-refrigerator-troubleshooting...

Apr 13, 2011 - and then I also noticed that the display buttons for the temperature is not working. ..... We have tried to reset the refrigerator with no luck. ..... I had a power outage yesterday and my Samsung Fridge RSG257 now shows an 88 .... I haveModel# RF268ABRS, this thing quit cooling/freezing after we lost power.

Error Codes / Messages / Blinking

PO code means power went off unplug unit to try and reset , also check for power to unit .

If PO code shows repeatedly even if there is no power outage, it is because the control board itself is restarting itself continuously. Something is causing the board to reboot, which could be the board itself or something connected to the board. In my case, it was the freezer evaporator fan. You can test a LOT of things with NO disassembly and NO tools by getting the tech sheet for your model and putting your refrigerator in diagnostic mode.

When I used diagnostic mode to run the freezer evap fan, the whole system restarted itself again, so I knew to change the fan out.

I posted this information on Appliance Blog forum, which is the first Google hit that recommends unconditionally to buy a new control board to resolve the PO code, and Jake the shady admin on that site DELETED my comment and my account and then LOCKED the thread because he'd rather mislead people into buying an expensive, non-refundable part rather than lose any face. Complete scumbag.

Hopefully people dig a little further and find this comment before getting ripped off and this helps them.

The correct water filter for you is 4396396. You can purchase this at:http://www.kitchenaid.com/flash.cmd?/#/accessory/4396395/

Kitchenaid offers free shipping and 10% off this month with promo code "FREESHIP" and free shipping with discounts for 2 and 3 packs of this filter.

you may have defrost problem

An ERR 2 may be cleared by a simple reset of the coffee maker. This means unplugging the unit and plugging it back in. When powered back on, select a brew function to see if the error reappears. This may take a moment.

If the code does reappear, ERR 2 indicates an internal error with the computer of the warming plate. This may be covered under Kitchenaid's 1 Year Hassle Free Warranty. I would advise you to call Kitchenaid Customer Service to see what options are available to you. Repair is not recommended, as it is not cost effective for the company or the consumer.

Their toll-free telephone number is 1-800-541-6390.