How do you set the clock on the auto radio model kenwood 45wx4

SOURCE: How to set a Timex Auto Set Clock Radio - T307S

Here is a link for your manual. Hope this helps. Please rate if this fixes your problem. http://www.timexaudio.com/pdf/T307_IB56281_07.pdf

SOURCE: pioneer 45wx4

I had the same problem with the "roay" dude. I did not have an "F" button. Try this...there is an "Audio" button to the top right of my display. Hold this button until the clock numbers blink. Use the up and down buttons till you get the time desired. This button will also allow you to change minutes. Thanks "scottcal" for getting me in the right direction.

SOURCE: set clock time kenwood car radio

Get into (standby mode) by hitting source (src) button until screen says "Standby".
M.Jog key is to the left of the (src) button. Hold it in for more than 1 sec to get into menu mode.
Move Toggle Control Knob (TCK) up (don't turn) until you see "Clock Adjust" on the screen.
Press Toggle Control Knob (TCK) in for more than one second and the time will appear (flashing).
Move TCK up/down for hours, left/right for minutes (again, don't turn knob).
Press (src) button when the desired time is selected.

SOURCE: How do I set the time on my Pioneer 45Wx4 car

Press and hold "SRC" button until radio turns off.

Press and Hold "Audio" button until clock display turns on.

Use the "select" right and left buttons to select the digit you want to change.

Use the "volume" + and - buttons to set the digit.

Frank Fulton

• 1114 Answers
• Posted on Nov 18, 2009

SOURCE: I have a kenwood radio model kdc-135 and can not set clock or sh

http://www.kenwoodusa.com/UserFiles/File/Global/Consumer/Manuals/KDC-135.pdf Here's the manual link from Kenwood and it's on page 13. Hope this helps