Symbols How do I turn the symbols off the screen or remove them from display

ENCs, or Electronic Navigational Charts, are digital versions of paper nautical charts that are used for navigation. In ENCs, different symbols are used to represent features such as buoys, obstructions, and shorelines.

The switch between paper chart symbols and simplified symbols in ENCs can typically be found in the settings or display options of the software or app that is being used to view the charts.
For example, in ECDIS (Electronic Chart Display and Information System), the settings for symbol display can be found in the "Chart Display" or "Chart Display Options" menu, and there may be a setting to switch between "Standard" or "Simplified" symbols.
Similarly in other ENC software like ENC viewer, it can be found in the settings or display options and have the option to turn on/off the Simplified or Detailed Symbol display.

It's important to note that the availability of this option may depend on the specific software or app that you are using, and you may also want to check the user manual or documentation of the software for specific instructions on how to switch between different symbol sets.

Make and type of device would help you get an answer. .............

South African connection issue from meter to supplier.

WBEC AND TAMER METER FAULT FINDING - Ekhwesi Energy

https://ekhwesienergy.co.za > images > forms > 44...

PDF When the power is turned on in terms of a wireless meter the screen should display "SEr" ... the UIU, when correctly paired the screen will display "RF Con" with a "tick". 5. The meter can then ... this means that the tamper latch has not ... If you have signal and the RF CON message on a meter that was previously paired then ...

Please Help With My Conlog Prepaid Meter - Technology ...

https://www.nairaland.com > please-conlog-prepaid-meter

ystar: If the conlog meter is showing rf-Con, it means power supply doesn't reach the meter at all its either Loss of phase from the transformer or a loose contact ...

Prepaid electricity: Wireless Meter ' MyBroadband Forum

https://mybroadband.co.za > forum > threads > prepaid-...

Jan. 22, 2018 · 3 posts · ‎3 authors
Asking for a friend, He is using a wireless electrical meter, however on the meter it says: rF con He said it's a conlog, so I googled it and...

Here are all Umeme yaka symbols and their meaning - Dignited

https://www.dignited.com > umeme-yaka-symbols-and-...

Jul. 29, 2015 - The power meter is really easy to understand. However, the meter will also throw some error symbols on the same display which we already ...

I pulled this info from the manual. I am including a pic and the link. Hopefully this is helpful.

If you do not want to use the CLEARYL filter cartridge Blue, you will need to set the water hardness. The following water hardness settings are available: Water hardness Symbol(s) shown in display Level 1: 1-15 °dH 1 symbol illuminated Y Level 2: 16-23 °dH 2 symbols illuminated Y < Level 3: 24-30 °dH 3 symbols illuminated Y < > & T Touch the Descaling symbol. The Y, < and & symbols light up. T Touch the Y, < or > symbol to set the water hardness, e.g. symbol Y for 'level 1'. The Y and & symbols light up. & T Touch the Descaling symbol. The Water Tank symbol M lights up. T Place a receptacle under the coffee spout. T Remove the water tank. T Fill the water tank with fresh, cold water and reinsert it. The Y, < and > symbols flash. The system fills with water and the water flows directly into the drip tray. The operation stops automatically. The machine heats up. The Y, < and > symbols flash. The machine is rinsed, water flows out of the coffee spout. The rinse stops automatically. The Ristretto Y, Espresso < and Coffee > symbols and the symbol for 'strong' coffee strength _ light up. Your ENA is ready for use.


https://secure.img1-fg.wfcdn.com/docresources/1803/27/278039.pdf

Depending on your version of windows, you will have to adapt these instructions.
Right click on the desktop and got to personalize/display settings, then go to appearance, and from there you should see the area that lets you set the desktop icons to small, medium, or large.

The fan symbols would normally indicate that the fan forced fan will come on when this setting is selected. The fan symbol is normally displayed with other symbols which depict different fan/element combinations.

Decimal Point and Separator Symbols
You can use the display setup (Disp) screen to specify the symbols you want for the decimal point and 3-digit separator.
• To change the decimal point and separator symbol setting, press the MODE key a number of times until you reach the setup screen shown below.
Display the selection screen. (Disp) 1.
Press the number key ( 1 or 2) that corresponds to the setting you want to use.
1(Dot): Period decimal point, comma separator
2(Comma): Comma decimal point, period separator

turn off DISPLAY

well dude i can help you i JUST fixed my friends cell we were searchin online fo a solution..

do this step as follows

1. remove the backpiece
2. remove the battery
3.remove the sd memory card
4.place the battery back in the supportive slot
5.re attach the backpiece
6. power up the fone

and wallahhhhh!!!! ^_^

the memory card is the problem

he placed the card back in the fone and the problem continued ...

u may need to purchase a new sd card