Question about OKI Office Equipment & Supplies

Oki C610 has an error message ERROR Code 480 A stacker is full

3 Related Answers

Brian

57 Answers

SOURCE: IT SHOWS ME THIS ERROR CODE C610 WHEN I SWITCH IT ON.

You have blown your thermal fuse, causing an open circuit.

You have to remove the fuser and remove the thermal fuse. It is very easy to get it, it looks like a round black stump with a shiny bottom with 2 space terminals at each end, the bracket should be white, you cant miss it.

remove the thermistor and throw it hard on the concrete outside, you will not break it, what you are looking for is to make it rattle again, once it rattles again, re-install.. and clear the error code..

To do this you will have to do the following;
Press 'stop/reset' then 'start' then left copy exposure button and hold them all down. This will enter simulation/tech mode.

Enter '163' you do this by pressing the + and - buttons (zoom buttons)

'CLE' should show up (Clear)

then press start.

Reboot the machine and you away again.

Posted on Oct 16, 2009

Anonymous

1 Answer

SOURCE: stacker full error

No, what is happening on top of the printer (output tray). There is a little black tab that pokes down, when that is out of position or the output tray is full. To fix this first remove all the paper on the top and move that black tab, so it points straight down. This should fix this error.

Posted on Sep 01, 2010

Lastoni Wibowo

2246 Answers

SOURCE: MB 480 OKI Printer Error Codes

you can some error code at manual
if you did not have manual you can download amanual at
http://www.german-parts.de/oki_manual/paperjam/stau_mb400_series.pdf
at that manual you can find some error code and how to fix it

Posted on Mar 12, 2011

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Error code 480 on my Oki C9655

480 is not listed in any OKI manual. However the closest to it refers to paper size mismatch. Check your driver setting especially paper size. If in UK make sure its set to A4. if in USA then yours is letter size.

Jun 04, 2018 | OKI Office Equipment & Supplies

1 Answer

How to replace fuser on oki c610

This should have everything you need. First of course - get an new fuser from you Oki agent.
http://www.fortwayneprinterrepair.com/wordpress/2015/01/05/okidata-c610-c711-fuser-replacement-44289101/

Feb 02, 2018 | OKI Office Equipment & Supplies

1 Answer

Fatal error 890 oki C610

throe in bin best as these are obsolete

May 07, 2016 | OKI Office Equipment & Supplies

1 Answer

What causes 6-tray collator to display 'stacker full' message?

there is a optical switch on the output tray that detects if the stack is full (no space to output) if this is stuck in the closed position this would trigger the "stacker full' message (the switch usually looks like a small movable plastic lever)

Jan 28, 2016 | Office Equipment & Supplies

1 Answer

Hp 9050 laser jet stacker error

Probably just a bad sensor or dirty sensor causing the issue.

Stacker or stacker/stapler output bins

For the 3,000-sheet stacker or 3,000-sheet stacker/stapler, the output bins are the upper bin (face-up) and the lower bin (face-down).

The upper bin (face-up) is the top bin on the stacker or stacker/stapler. This bin holds up to 100 sheets of paper in face-up order as they exit the printer. A sensor causes the product to stop when the bin is full. Product operation continues when you empty or reduce the amount of paper in the bin.

Lower bin (face-down) is the lower bin on the stacker or stacker/stapler. This bin holds up to 500 sheets of paper and can stack or staple jobs. This bin is the default output bin.

Aug 19, 2014 | HP Stacker For LaserJet 9040/9050/9500...

1 Answer

I have a c610 oki printer with a 231 error code

Replace the RFID R/W board.

Nov 09, 2013 | Oki Electric Industry C610dtn Laser...

1 Answer

MB 480 OKI Printer Error Codes

Mar 12, 2011 | Oki Electric Industry Okidata MB 480 ...

1 Answer

Stacker full error

Feb 24, 2010 | Brother HL 2700CN Laser Printer

1 Answer

Printer is displaying 65.12 error

There is no 65.xx error code
the following code should help you.
66.00.15 EXTERNAL DEVICE FAILURE
Description
The stacker or stapler/stacker was removed and then replaced with the printer power was on.
Action
1. Turn the printer power off.
2. Make sure that the accessory is properly seated on and connected to the printer, without any gaps between the printer and the accessory. If the accessory uses cables, disconnect and reconnect them.
3. Turn the printer power on.
4. If the error reappears, record the message, and contact HP Customer Support.

Oct 29, 2008 | HP LaserJet 4350 Printer

6 Answers

Service Call: 173: Fatal Error

That is a fuser erron code. Abnormal temperature. You will need to replace the fuser. Sometimes I have sen a buildup of toner on the thermistor. If you can get to it. You can try to clean the toner off. Be careful. Very hot.

I’m happy to help further over the phone at https://www.6ya.com/expert/jayw_0e86fb055a7b73de

Aug 10, 2007 | OKI C5150n Led Printer