- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
After connecting the audio security system to the battery, "CODE" will flash on the display.
Enter the proper security number into the unit, using the preset buttons No. 1 through 8.
For example, if the security number is "1234":
Press the preset button No. 1. "CODE" will disappear and "1 --- " will appear on the display.
Press the preset button No. 2, and "12 -- " will appear.
Press the preset button No. 3, and "123- " will appear.
Press the preset button No. 4, and "1234" will appear and flash three times.
The audio system will function and will transfer to the radio. If the incorrect security number is XXXXX into the unit, "Err" will appear followed by "CODE" and there will be several audible beeps. If this happens, repeat the security entering procedure beginning with Step 2.
Hope this helps.
If code doesnt work then it is dealer, sorry.
The factory preset/default code is 1234. It will go back to this code when you change or remove the batteries. Insert the card and enter 1234 pin. When you get the screens that read "account balance, make deposit, or make withdrawl" press the enter key twice and enter your new pin number.
using a comma ',' for evey three second delay you need until the PIN needs to be keyed.
so for example:
8005551212,,1234 will dial the number 8005551212 wait 6 seconds then dial 1234
you can key in a comma by holding down the * key until it changes to a comma