Error code dc

Question edited for clarity. The code is 'Nd', or 'dn'? Neither seem to exist

https://applianceexpresstx.com/dryer-repair/samsung-dryer-error-codes-explained/

'D' codes

Error codes: dC, dE, dF, do, d0, 1 DC, and 1 dF
These error codes indicate a problem with the door, most commonly the door latch or the sensors. When these codes appear, it generally means you need to check your door to see if it closes properly.

More here

https://www.thespruce.com/troubleshooting-samsung-dryer-error-codes-2147296

https://www.google.com/search?q=Samsung+Laundry+Dryer+code+dn%2C+code+nd

..

It appears to be a known issue!

https://www.google.com/search?q=Samsung+Ecobubble+WF90F5+9kg+Washing+Machine+Fuse+Blow

..

link to how to fix


http://www.appliancepartspros.com/diy-story-samsung-wa456-error-code-dc-balance-spin-diy1142886.html

This usually means too much soap or the incorrect soap if it is a HE washer you only need enough to coat the clothes and FYI never use non HE soap in HE washer the difference is regular soap suds up too much and HE has less sudsing ingredients hope this helps

should tilt fwd and up?

DC error code means: "Unbalanced load". It can occur if the washer:
1. is overloaded (too many clothes inserted),
2. can't balance the load within a few balance cycles,
3. has a damaged balance sensor,
4. isn't regulated properly (vibrates abnormally).
IMHO you just overloaded the washer :)

Product: Home Appliances > Washers & Dryers > Washers > WF218ANW
dc = Unbalanced load prevented the washer from spinning.
What Do the Information Codes Mean on the Front Load Washing Machine

That is actually the error code 5E. It means the water did not drain properly. Should be able to reset it by pressing down the start/pause button and holding it down.

Possible fault with the door switch or the control panel but you can try to open and close the door few times to reset after removing power.
click this link: error code F26