I need the bolt and washer for a 6 1/2" rival meat slicer

woobie dog

• 1273 Answers
• Posted on Aug 08, 2009

SOURCE: I need to know where to get a meat slicer tray?

I also bought one at a yard sale, complete and in the box. It did not have a meat tray with it, nor a picture of one on the box, nor any mention of one in the instructions. I just use a plate, and it works fine. Sorry.

Best regards, --W/D--

SOURCE: Rival Meat Slicer Model 1037 Pin for blade

i too need a pin for this modle. has anyone solved this problem for that person?

SOURCE: I Need A New Slicer

Hi eblatz,

Rival meat slicers have been manufactured for decades so locating parts for your slicer will depend on the model and age or your unit. There are a number of companies online that will sell replacement parts for most Rival meat slicers. They will need the model number and/or name of the actual slicer to help you locate the proper parts. You can contact Sears for this, 1-800-252-1698; M-F 6:30 AM-10:30 PM - Sat 7:00 AM-9:30 PM - Sun 7:30 AM-9:30 PM - All times Central.

Hope this helps.

Thank you for using FixYa.

SOURCE: I have a Rival Meat Slicer, Model #1030V or 1101E

http://askville.amazon.com/obtain-manual-Rival-meat-slicer-model-%231030V/AnswerViewer.do?requestId=11029041

SOURCE: Rival slicer model #65301, sparks when I slice meat, need a new motor ?

not necessarily, you can clean the commutator (where the carbon brush is touching the rotor-where you see the sparks are coming from). you may want also to replace the carbon brushes if worn out