Audio Players & Recorders Logo

Related Topics:

Question about Yamaha Audio Players & Recorders

Open Question

Can I hook up a non digital subwoofer to the digital output of my Yamaha surround sound system?

Posted by George Shiflett on

Ad

5 Related Answers

Anonymous

SOURCE: hooking up surround sound

do you need a reciever to get ceiling mounted speakers to work surround sound

Posted on Jul 13, 2008

Ad

Bob Citizen

  • 520 Answers

SOURCE: digital audio out jack

That output only works with digital signals (digital tv channels and digital audio from the hdmi in jack).
The HDLCD2600 has no analog out. Sorry.

Posted on Oct 23, 2008

Ad

Anonymous

  • 62 Answers

SOURCE: cerwin vega ht-10d subwoofer won't work in yamaha reciever

Actually, I had the same problem with my JBL PB10. It was the cable. I had to buy a one direction shielded rca cable. If you put it in backwards it will not work. The cable was around 75.00. But it was well worth it. The first cable I tried was a cheap sony brand sub rca cable. I ended up buying the AR(Acoustic Research) 15ft. directional subwoofer RCA cable from Best Buy. Make sure you have your receiver set to the proper setting too. If you have it hooked to main, set it to main. If you have it hooked to the L.F.E.(RCA cable) set it on L.F.E.. Some have the option to set to both. If it is a non powered sub a RCA cable will not work. You will have to run your main speaker cables to the sub first, then from the sub to the speakers. It then "piggybacks" the Low Frequency signals from the receiver.

Posted on Jan 08, 2009

Anonymous

  • 1 Answer

SOURCE: KLH SUBWOOFER - RECEIVER-SURROUND SOUND -5 SPEAKER HOOK UP INSTRUCTIONS

Had the same problem with KLH E-10D Preamped Subwoofer. Afte brief research, I found the problem was with my Pioneer VSX-D509S reciever settings, not the subwoofer. If you have the same reciever, you can go to the pioneer website to download specific model owner's manuals.

http://www.pioneerelectronics.com/PUSA/Support/HomeEntertainment/ch.AV-Receivers.Archived?vgnextfmt=Archived

Select your Pioneer reciever model and it will give you an option to download the pdf manual. Hope this helps.

Posted on Jan 24, 2009

Anonymous

  • 1 Answer

SOURCE: No Soound on Subwoofer from Yamaha RX-V363

I have the same setup. Are you going out of the subwoofer output of the reciever? (it's purple.) then into the LFE jack of the subwoofer (also purple.) That's the only connection you need besides power. If you have those right, try using your cable for something else to make sure the cable is good. Is the indicator of the subwoofer green? Mine comes on with the reciever. Good luck!

Posted on Apr 14, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Will a panasonic tv work with a yamaha surround sound system

Yes, any TV will work with any surround system. It all depends on how you wish to connect them together. That all depends on what kind of inputs/outputs you have on both the TV and the amplifier. Too difficult to advise without being there and having the operating manuals for both the TV and 5.1 system.
0helpful
1answer

My surround sound shut off and sound went to tv as it's output source

try unplugging it and pluggin it back in. and make sure no wires are touching that would make it shut down.
1helpful
1answer

My tuner will not set up on the TV/CBL for sound. I get a beautiful picture no sound?

Your Cable Box should have a nice digital audio output that's compatible with the Yamaha (model ??). Then you might have to assign the digital input so you can select it with, say, TV on th receiver.
0helpful
1answer

Yamaha HTR-5660 receiver but no surround sound

have you tried putting it in a different program mode?
1helpful
1answer

Chain Surround sounds?

Yes, the simplest way is to feed the signal from whatever you want to listen to into both systems, either by using a "splitter" which takes the output from the signal source and "splits" it in to multiple outputs which you can feed to the 5.1 systems. Please rate my answer, thanks.
0helpful
2answers

Hooked up to sony bravia 52" tv and can barely hear sound

You'll want to turn of the TV speakers in the Remote Menu and try turning up the volume level of the TV, which usually controls the level of the RCA outputs, as well
2helpful
1answer

Connection a JBL surround cinema speakers with sub to a Yamaha

if you do not have the digital hook up from the tv to the reciever
304c659.gif then you will not get the subwoofer sounds or the dolby digital sounds
if you don't have this on your tv then just turn off the dolby digital when watching the tv , and you should be able to hear the subwoofer thru the virtual surround sound
hope this info is worth a fixya and if you need other help then just ask me and
i'll be glad to help

electech
0helpful
2answers

Need help hooking up to digital cable box, and tv

If the cable box isn't transmitting surround sound your stereo won't play it. You may be able to emulate it with settings on the receiver.
Not finding what you are looking for?

66 views

Ask a Question

Usually answered in minutes!

Top Yamaha Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5750 Answers

The Knight
The Knight

Level 3 Expert

76851 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22509 Answers

Are you a Yamaha Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...