Question about Food Processors

I have a Breville BFP600 food processor. The top of the locator shaft of the main chopping blade is broken. Part no 02 on the exploded diagram. Can you assist?

5 Related Answers

Anonymous

1 Answer

customer service number 1-877-207-0923 for hamilton beach

Posted on Nov 16, 2008

If the blade is actually fused, I would seek professional help to avoid slicing your fingers off. You can test to see if it is fused by removing the lid of work bowl, twisitng work bowl to the left, and removing the work bowl - if work bowl will not come off (difficult even under normal circumstances), then find out from Cuisinart if you are still under warranty.

Posted on Dec 10, 2008

Ryan S

328 Answers

SOURCE: broken blender jug for breville FP12

Hi Contact Breville customer services on:
http://www.breville.co.uk/contactus.html
Either phone them or email them - they should be able to sort you out with a replacement jug.

Posted on Mar 30, 2009

Anonymous

1 Answer

SOURCE: I need chopping blade for Hamilton Beach food processor

I have the same issue no one seems to have the blade

Posted on Nov 28, 2009

papajoe996

1 Answer

SOURCE: I'm looking for parts for a hamilton beach scovill

We have the part you need! it is a round white plastic disc with the carrot shredder- Also have the drive pin for it.
Please contact me at [email protected] if you can use it!!
With regards
Joe Pesch

Posted on Dec 12, 2010

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

5 Answers

Hamilton Beach Food Processor Model 702R need replacement S Blade

Hamilton Beach 702R User Manual

Hamilton Beach Food Processor 702R Replacement Parts

Hamilton Beach Food Processor Main Chopping Blade Replacement Part 702R

Hamilton Beach Food Processor 702 Replacement Shredding Slicing Disc Blade

Mar 29, 2015 | Hamilton Beach 702R Food Processor

1 Answer

How to remov blades

The blade will be stuck on the shaft and both will be damaged and require replacement. With that knowledge you now understand that drilling a hole sideways through the blade cap isn't wrecking anything you are going to use again. You can then get something into the hole for leverage. Here in NZ blades are under $20 and motor shaft sleeve is about $5.

Aug 11, 2014 | KitchenAid Food Processors

1 Answer

Kitchen aid food processors 's chopping blade gets stuck . Very hard to take it out

The shaft sleeve (the one on the motor shaft) is likely damaged. The correct solution is a new shaft sleeve and chopping blade. If you do not replace them both together the one you do not replace will damage the other one again.

Aug 23, 2013 | Magimix 5100 Cuisine Systeme Food...

1 Answer

Breville foodprocessor Wizz Professional FP16B Is a replacement metal s shaped chopping blade available Paraparaumu Beach New Zealand

is there anyone know where to find a blade chopper for breville wizz profesional fp16b model.

May 17, 2011 | Food Processors

1 Answer

I have an old Braun Food Processor and today while making cheesecake in the machine, it started to make a funny noise and then it would not allow me to remove the chopping blade from the base. Any idea...

Best bet would be to send it to a Braun service center. It is possible that the Blade has now fused to the motor shaft. Try Smallappliance.com, they are authorized and have years of experience with Braun and other products. [email protected]

Mar 08, 2011 | Braun K 600 CombiMax Food Processor

1 Answer

I need chopping blade(1000 ml bowl) for a 4262 Braun food processor.

I have a chopping blade for the 1000ml bowl Braun food processor.

Feb 23, 2011 | Braun Food Processors

1 Answer

Put in nuts and turned to mush

It is extremely difficult to chop walnuts in a food processor, because they turn to powder within a few seconds. I have chopped them using both a Cuisinart food processor and a Moulinex La Machine. The difficulty arises because even after you have released the on or chop button, the blade continues to spin for a second or two. The Cuisinart DLC-8S is not particularly well-suited for chopping nuts, because the blade is not reversible - there are many Cuisinarts that do have reversible blades - a particularly good one is the Cuisinart DLC-2A, which has both a reversible blade and a Chop function (retails for about $29.99 to 39.99 nowadays).

The only way to have any success whatsoever with the DLC-8S is to press the pulse button and release immediately - only use a small amount of walntus - and then dump the bowl and add a few more at a time.

Apr 04, 2009 | Cuisinart DLC-8S Pro Custom Food Processor

2 Answers

Blade holding disc for Breville Food Processor Model No. FP7/FP8 Replacement required. Phone numbers required for contact.

Hi. I'm a Breville Service Centre.

No new parts for FP7 or FP8 are available, your best bet is to check out garage sales or you local Salvos/St Vinnies etc as people may sell their odd pieces once their motor dies. Which is rare because they were good machines!

Good luck!

Mar 18, 2009 | Food Processors

1 Answer