- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
more info needed please, but if its an iphone and it is only one contact or network you are having a problem with, delete the contact from your contacts list, including any text messages or calls received from it. switch phone off then back on, re enter the contact details and try again. This can also work on other phones as well.
Network provider sometimes caused this problem because of their system mulfunction or upgrade. With that sometimes we can call but texting unable to send or received, but sometimes a signal indicator is full but not connected to the network provider, it means a feak signal. My recomendation is to contact network provider hotline and tell your problem or replace simcard. If yuo totally cannot call and text then positive your fone has a signal problem and need repair on it. Good luck
you may have to check your settings on the nokia- may not have text message 'up-loading'- 'sending' set up. your service may allow 'free' incoming- but not sending! check your phone settings- may need to go on-line to alter your settings! or find info to set your phone! good luck!
Two things to try. One is remove the battery then remove the sim card make sure it is clean. Wipe it with alcohol. If it still does not work you may need to go to your nearest store and they should be able to check it for you to make sure there are no updates that your phone normally downloads and you never know it. Usually when they place a new tower. I had a similar problem. Also if your sim chip is bad ATT can replace it usually at no charge and that should fix the problem.