Hard reset on my msi gaming desktop

To allow a program to communicate through the windows firewall follow the steps here: http://windows.microsoft.com/en-au/windows/communicate-through-windows-firewall#1TC=windows-7

If you have a third party firewall installed, please provide the name of the firewall you are using.

Hello, just power off your PC and try to reset the motherboard configuration. Follow this steps:

1. Pull out the memory card, bios battery and the connector that connect your hard drive its either IDE or SATA connector. Then pull up the jumper of the bios then put it to the reset jumper settings.
2. Turn on your motherboard then let it for about 5 minutes.
3. After 5 minutes, turn off and put back all the devices you just pull outed and try to put the jumper settings to normal.

4. Then Turn on again and see if the motherboard will turn on.
5. Do not forget to clean the memory card with an eraser.

Hi,

Please elaborate your problem providing us with more details of the problem.

Thanks for using FixYa.

Sometimes, during load, Roxia Digital Media Archive doesn't load correctly, or becomes corrupt. This is where you are getting the EZARC.msi request from. If you follow these steps, you shoud resolve the problem.

start > all programs > HP Application Recovery

When the Application Recovery console comes up, Choose Application Installation then click NEXT.

When the list comes up, highlight Roxio DigitalMedia Archive by clicking on it, then click the "Install" button.

It will re-install Digital Media Archive, and fix your EZARC.msi search issue.

Hi, insert the cd that came with it, boot the system with it and follow step by step instruction on repairing and formatting the hard disk or get a windows operating system and perform the same.

Hi,

Windows installed is trying to configure the missing .msi file.Please follow the below steps to remove the msi files.

1. Download the Windows Installer Clean-Up utility (see Resources for link). Click the link on the download page on the Microsoft website and save the file to your Windows desktop.
2. Double-click the utility setup icon on the desktop.The icon is labeled msicuu2.exe. Follow the prompts and the installation wizard instructions to install the utility. Click the "Finish" button in the installation wizard when it is finished.
3. Open the utility. Click Start > All Programs >Windows Installer Clean-Up. This opens the Windows Installer Clean-Upwindow.
4. Click to highlight the program whose MSI files "DOCPROC" you want to remove, then click the "Remove" button. Thisopens a warning prompt window.
5. Click the "OK" button in the warning prompt window.The utility will remove the MSI files for the "DOCPROC"application you selected.

Regards,
Rizwan

Okay....take a deep breath, we'll do this step by step.

1. Go to the following link: http://www.msi.com/index.php?func=driverfile&dno=9927&i=0

2. Select where you want to download the file from. It's best to pick the one that reflects your location.

3. Once the file has been downloaded, extract the folder to someplace you can find it again, e.g. Desktop or MyDocuments or something like that.

4. Run the file called "setup.exe" (without quotes)

5. Follow the directions of the installer

6. Taadaa! All done, you can relax again.

Good luck and don't hesitate to message me if you have any questions/need help.

Hi,

On the BlackBerry smartphone, the 523 app. error Reset error message appears after pressing the Mute button, accessing an application, or performing a hard reset:


To resolve this issue, first perform a hard reset.

A hard reset involves physically removing the battery from the smartphone and then reinserting it. To perform a hard reset, complete the following steps:
1) Remove the battery cover from the back of the BlackBerry smartphone.
2) Remove the battery, and then reinsert it after a few seconds.
3) Replace the battery cover.

If this does not resolve the issue, the BlackBerry Device Software must be re-installed.

Note: The BlackBerry smartphone will not show a Connected state in the BlackBerry Desktop Manager. Proceed to open and run the application loader tool.
If BlackBerry Desktop Manager cannot connect to the BlackBerry smartphone, perform the following steps:

1. Remove the battery and run loader.exe from
C:\program files\Common Files\Research In Motion\AppLoader.
2. Remember to reinsert the battery after the loading operations begin.

I Hope it helped you.

Thank you for using ' Fixya ' and have a nice day!!

On the BlackBerry smartphone, the following error message appears after pressing the Mute button, accessing an application, or performing a hard reset:
523 app. error. Reset.

To resolve this issue, first perform a hard reset.

A hard reset involves physically removing the battery from the smartphone and then reinserting it. To perform a hard reset, complete the following steps:
1) Remove the battery cover from the back of the BlackBerry smartphone.
2) Remove the battery, and then reinsert it after a few seconds.
3) Replace the battery cover.
If this does not resolve the issue, the BlackBerry® Device Software must be re-installed.

Before proceeding, make sure that the latest version of BlackBerry Device Software is installed on the desktop computer by completing the following steps:
To perform a clean installation of the BlackBerry Device Software using BlackBerry Desktop Manager 4.5 to 5.0, perform the following steps:

1. Open BlackBerry Desktop Manager.
2. Click Help.
3. Select About Desktop Manager.
4. Click the Device Software tab.
5. Verify that the BlackBerry Device Software displayed is the latest version currently available from the wireless service provider

Warning: The following procedure will delete either all data, or all data and applications on the BlackBerry smartphone. Back up the BlackBerry smartphone data before proceeding.

1. Connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager.
2. Double-click Application Loader.
3. Click Next to start the installation process.
4. Type your BlackBerry smartphone password, if prompted, and click OK.
5. Select the check boxes next to the names of the applications to be loaded, and then click Next.
6. Click Settings, and then select the check boxes beside Delete all application data and Erase all currently installed applications.
7. Clear the check box next to Backup up device data automatically during the installation process.
8. Click Ok > Next > Finish.
9. When the process has completed, the message The loading operation was successful will appear. Click Close to return to BlackBerry Desktop Manager.

To perform a clean installation of the BlackBerry Device Software using BlackBerry Desktop Manager 4.1 to 4.3, complete the steps 1-5 above and then proceed with the following:

1. Click Advanced , and then select the check boxes beside Erase all application data and Erase all currently installed applications
2. Click Next.
3. Select the check box next to Do not automatically backup the application data during the loading process (if prompted).
4. Clear the check box next to Backup and restore applications installed wirelessly (if prompted).
5. Click Next > Finish.

The BlackBerry smartphone will not show a Connected state in the BlackBerry® Desktop Manager. Proceed to open and run the application loader tool.
If BlackBerry Desktop Manager cannot connect to the BlackBerry smartphone, perform the following steps:

1. Remove the battery and run loader.exe from C:\Program files\Common Files\Research In Motion\AppLoader.
2. Remember to reinsert the battery after the loading operations begin.

To resolve this issue, first perform a hard reset.
A hard reset involves physically removing the battery from the smartphone and then reinserting it. To perform a hard reset, complete the following steps:
1) Remove the battery cover from the back of the BlackBerry
smartphone.
2) Remove the battery, and then reinsert it after a few seconds.
3) Replace the battery cover.
If this does not resolve the issue, the BlackBerry® Device Software must be re-installed.
Before proceeding, make sure that the latest version of BlackBerry Device Software is installed on the desktop computer by completing the following steps:
To perform a clean installation of the BlackBerry Device Software using BlackBerry Desktop Manager 4.5 to 5.0, perform the following steps:
1) Open BlackBerry Desktop Manager.
2) Click Help
3) Select About Desktop Manager.
4) Click the Device Software tab.
5) Verify that the BlackBerry Device Software displayed is the latest
version currently available from the wireless service provider.
The following procedure will delete either all data, or all data and applications on the BlackBerry smartphone. Back up the BlackBerry smartphone data before proceeding.
1) Connect the BlackBerry smartphone to the computer and open
BlackBerry Desktop Manager.
2) Double-click Application Loader.
3) Click Next to start the installation process.
4) Type your BlackBerry smartphone password, if prompted, and click
OK.
5) Select the check boxes next to the names of the applications to be
loaded, and then click Next.
6) Click Settings, and then select the check boxes beside Delete all
application data and Erase all currently installed applications.
7) Clear the check box next to Backup up device data automatically
during the installation process.
8) Click Ok > Next > Finish.
9) When the process has completed, the message The loading
operation was successful will appear. Click Close to return to
BlackBerry Desktop Manager.
To perform a clean installation of the BlackBerry Device Software using BlackBerry Desktop Manager 4.1 to 4.3, complete the steps 1-5 above and then proceed with the following:
1) Click Advanced , and then select the check boxes beside Erase all
application data and Erase all currently installed applications
2) Click Next.
3) Select the check box next to Do not automatically backup the
application data during the loading process (if prompted).
4) Clear the check box next to Backup and restore applications
installed wirelessly (if prompted).
5) Click Next > Finish.
Note: The BlackBerry smartphone will not show a Connected state in the BlackBerry® Desktop Manager. Proceed to open and run the application loader tool.
If BlackBerry Desktop Manager cannot connect to the BlackBerry smartphone, perform the following steps:
1) Remove the battery and run loader.exe from C:\Program
files\Common Files\Research In Motion\AppLoader.
2) Remember to reinsert the battery after the loading operations begin.