Question about NEC Computers & Internet

1 Answer

Failing to configure my VOIP phone on my NEC PABX. it started to bother me after changing fault IP phone to put a new phone. can someone help i need to bring back the once working VOIP extension.

Posted by Righteous... on

Ad

1 Answer

Salvador Ambrocio

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Unlock my estereo the scram said only 1 800

Posted on Nov 13, 2018

  • Salvador Ambrocio
    Salvador Ambrocio Nov 13, 2018

    Unlock my estereo the scram said only 1 800

×

Ad

5 Related Answers

Anonymous

  • 1 Answer

SOURCE: HP LJ p2015dn IP configuration using HP Toolbox FX

Hi Basically I powered up the printer unplugged the network cable. Reconnected and waited 2 min. Pressed green button till first sign of green light flashing. The printer then printed out a printout which shows ip address on first and third page. I then used internet explorer to change printer from DHCP settings to fixed. just type new ip address on internet explorer address line. PC and printer must be on same network.

Posted on Jul 28, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: How do I change someone's name for a specific extension?

input pasword

Posted on Feb 10, 2009

Anonymous

  • 19 Answers

SOURCE: Interconecting 2 Panasonic KX-TDA 200 & KX-TDA600

You are asking for some very advanced setup features, as far as connecting them you need the IPGateway cards. They are cat5 cards that will do the trick. However programming the setup to do what you want will be VERY time consuming and not to easy to walk someone through. On-site tech is highly recommended for that much programming and work.

Posted on Apr 13, 2009

Brian LaDuca

  • 149 Answers

SOURCE: Change Extensions on NEC IDK Phone?

It is easier to move the wires but if you know how to go into programming than change the extension numbers on the ports in mb 4-10

Posted on Jul 08, 2009

Anonymous

  • 11 Answers

SOURCE: i am unable to push the configuration files into polycom soundpoint ip 330 through tftpd

This means the phone's SIP application has been erased. You will need to download the SIP app and BootROM from the Polycom support page, host the files on a boot server, and then point the phone to this server from the server menu so the phone will reboot and download the files.

http://www.polycom.com/support/voice/soundpoint_ip/soundpoint_ip330_320.html

Posted on Jan 12, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi Team We replaced our existing Nortel Switches with Nortel 2550T 48 Port Switches and since then our VoIP phones are not getting IP from DHCP. Putting static IP is working. Can you please guide me...


As you described it there shouldnt be any problems with your configuration, there should be auto ip conf. enabled so VoIP phones should accept 1st IP range automatically. If that doesnt help contact your operators. Thats all. Good luck!

Please rate my solution! :)
Aleksandar Adzic

Aug 23, 2010 | Nortel 2550T 48-Port Ethernet Switch...

1 Answer

When setting up QOS. What does a data vendor need


"auto qos voip cisco-phone" on poe port, "auto qos voip trust" on both ends of the uplink trunk.

Feb 11, 2010 | NEC Computers & Internet

2 Answers

Cisco IP Phone 7940 and 3com nbx as 3rd party SIP phones


Here are the instructions for configuring these units for 3cx

http://www.3cx.com/sip-phones/cisco-7940.html

http://www.3cx.com/sip-phones/polycom-soundpoint.html

Since the 3cx softphone worked well, I don't see why you couldn't configure each as for 3cx and make them work as well.

Dec 09, 2009 | 3Com NBX 2102PE IP Phone

1 Answer

IP address


your voip enabled phone uses dynamic ip addressing so doesn't have a fixed ip. however if you want to configure the phone Connect the WAN port of the SPA922 to your network (router, switch or hub). Make sure that you have a DHCP server so that the SPA922 will get the IP address.

To login to web based administration follow the steps

Access the web based setup page of the SPA922. Verify the IP address through the LCD. Click Menu then press 9. It should show you the DHCP IP address. Open a browser and type that in the Address bar. 

Click Admin Login .


Note: The SPA922 does not have a username and password by default. If you are asked for a username and password and you have not configured a password, it means that the SPA921 is locked by your VoIP provider. You need to obtain the password from your VoIP provider.

if this helps resolve your issue please vote for me. thank for using fixya.

Aug 10, 2009 | Linksys SPA922 IP Phone

2 Answers

Button is yellow. Error msg Failed/No Response


I don't know about linksys but in Cisco you can use a TFTP Server Program, put the firmware that server, and boot up the phone. In Cisco it goest to the server and it uploads the new firmware.

Jun 18, 2009 | Linksys SPA942 IP Phone

2 Answers

IP ADDRESS OF VOIP PHONE ADAPTER 2 PORT PAP2NA


doanload colosoft netscan, when you have it plugged into the network, run netscan on a computer thats on the same network....that'll find it for you, if that doesnt work give me the specs on the phone and ill check the manuels..

Jan 22, 2009 | Linksys VOIP PHONE ADAPTER 2-PORT (PAP2NA)...

3 Answers

Philips 321 voip problem


If you are using this phone with skype and you can't call out and you can't hear when someone calls out, the skype isn't configured properly to use the philips 321.

http://www.p4c.philips.com/files/v/voip3211s_79/voip3211s_79_dfu_eng.pdf

User manual available on above link.

Jan 19, 2009 | Philips VOIP3212 IP Wireless Phone

1 Answer

I have a NEC NDK 9000 PABX fault after relocating phone lines,1 extension is not working and the other 2 are, I have noticed there is a red light flashing on one of the cards and am assuming there is a...


Each PABX or telephone system needs its own driver as each system has its own output format for the SMDR port. Therefore the MonTel system must have a suitable driver (technically a receiver) for each type of PABX that it can support.

http://www.netwiz.com.au/appnotes/1872.htm

May 10, 2008 | Lands Phones

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Cindy Wells

Level 3 Expert

6164 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Are you a NEC Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...