Question about Rotel Audio Players & Recorders

Open Question

My 6 year old Rotel Rx 1500 worked very well; I've listened to Internet radio via wireless connection, but now it is not connecting to the Internet. A message says station unavailable/low signal.

The other components (CD, etc.) are working well. There have been instances in the past when the same message appeared, but the Internet was not working. However now the Internet is working well throughout the house. Any help would be greatly appreciated.

Posted by alfred demaria on

Ad

5 Related Answers

Anonymous

  • 21 Answers

SOURCE: Wireless and internet

1. Make sure that wireless settings are properly synchronized.
>> ssid/security key.
2. Check your computers wireless connection status
> Make sure that it is set to "obtain ip address automatically)
3. If still not working if computer is set to obtain ip automatically, try assigning static ip on wireless pc
> You need to know your router's ip address and dns
4. Disable firewall on wireless pc.

Posted on Jan 26, 2008

Ad

Anonymous

  • 176 Answers

SOURCE: Internet connection via wireless router

change the settings in explorer ... Tools- Internet Oprions- Connections

Posted on Jun 23, 2008

Ad

Anonymous

  • 9 Answers

SOURCE: radio wont tune in stations, anttena connected (yes)

Check your grounds.

Posted on Sep 08, 2009

marked

Mark Gil

  • 6487 Answers

SOURCE: my wireless router is not transmitting a signal

If the router is not transmitting signal the best thing to do here to correct the problem is to reset and and reconfigure the router, to reset it press and hold the reset button of the router for 10 seconds while power is ON and then after that power it OFF for 10 seconds and reconfigure it back.......

Posted on Dec 06, 2009

joncowden

  • 36 Answers

SOURCE: Hi...my wireless internet was working fine.....the

Open up a command prompt Start --> Run --> CMD then type : ipconfig /release
then type: ipconfig /renew
That should give you a new IP address.

Posted on Jun 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Instant message in yahoo can't appear


When you send or receive an instant message and no message appears, you probably have scripting disabled in your Internet Explorer.
To enable scripting:
  1. Click the "Tools" menu on your Internet Explorer toolbar and select "Internet Options."
  2. Click the "Security" tab.
  3. Click the Internet (globe) icon and click the "Custom Level" button.
  4. Scroll down to "Scripting."
  5. Enable the following:
    • Active scripting
    • Allow paste operations via script
    • Scripting of Java applets are all enabled
  6. Click the "OK" button at the bottom of the window.
Note: Restart Yahoo! Messenger and you should start seeing text in your IM windows again.

Dec 21, 2010 | Yahoo Messenger

2 Answers

On calling up the internet using our USRobotics 56K Faxmodem USB, I get on the net. At almost the same time, however, these messages appear: (a) "USRobotics Internet Call Notification cannot find a...


I would recommend you attempt to first remove your model software from the pc, first make sure you have the cd / or other drivers for it.

when you have all that removed. Reinstall the software.

That should get rid of the error messages.

Let me know how it goes.

Thank you,
Ekse

Jun 27, 2008 | Computers & Internet

1 Answer

I WANT TO INSTALL TALLY 9 AND USE IT WITH OUT INTERNET CONNECTION WILL IT BE POSSIBLE. HELP


To activate your license offline follow the steps shown: Go to Gateway of Tally ???? Press F12: Configure > Licensing > Offline > Activate The Activation Form appears ???? Enter the Serial Number in Serial field ???? Enter the Activation Key in Key field ???? Enter the Email ID in E-Mail field ???? Tally displays a message indicating that the tally_req.lic file has been successfully generated. ???? Copy tally_req.lic file available in the Tally folder to a floppy/CD ???? Paste tally_req.lic file to another computer with Internet connectivity and Tally installed. ???? Start Tally ???? Press F12: Configure > Licensing > Offline ???? Select Send External Request to send the request file to Tally Licensing Servers. The response file called tally_resp.lic is generated and saved in in the Tally folder. ???? Copy the tally_resp.lic file to a floppy or CD and paste the file into the Tally folder where the license has to be activated. ???? Start Tally ???? The Register Now screen appears, ???? Press Enter to work on Tallly
important:if this information was helpfull to you please vote for me and write a comment for me.

Sep 02, 2010 | Computers & Internet

1 Answer

After I start my computer and before I go to the internet a message has started to appear. ''Unable to locate component. This application has failed to start because MSVCR71.dll was not found....


Click here Click on above link then enter show code then download file. Then if it Then copy that file and paste it in c://windows/system32 folder then restart computer then it will work fine. Let me know if you need further assistance. Thanks for using FixYa.

Jul 27, 2010 | Microsoft Windows XP Home Edition

1 Answer

Sir some writing


hello,

the component name on the board or numbers are known as alphabets,

they are used when trying to type messages to be sent to people though text messages.

the alphabets are to direct you on how to locate them on the board or numbers.

for instance if you are trying to type alphabet k on the phone, you punch the key 5 three times and you k appears on the screen.

so that is what the component name on the board is all about.

take care.

May 27, 2010 | Samsung Tocco F480 - Pay Monthly Cellular...

1 Answer

I tried to download MS Paint from control panel/add/remove windows components but when i click on add/remove windows components a message appears stating that "SETUP WAS UNABLE TO OPEN INFORMATION FILE...


1. Open a cmd line
2. start
3. then click on run, type "cmd" in the box then ok.
4. When the cmd box pops up c:>
5. type: c:>\windows\inf\sysoc.inf
6. when the note pad window pops up scroll down till you see the line:

TabletPC=tabletoc.dll,TabletSetupProc,Tabletpc.inf,HIDE,7

It would be wise to save the "TabletPC=tabletoc.dll,TabletSetupProc,Tabletpc.inf,HIDE,7" string to replace if anything goes wrong.

Just cut and paste in word etc and you can just paste it back in the sysoc notepad if anything weird happens, OR

7. Simply highlight this then delete it. Now hit save in the file option tab. Close the window and now you should have access to the change or delete files in the control panel..

if this works for you let me know




Oct 12, 2009 | Microsoft Windows XP Professional

1 Answer

I am unable to cut and paste for the internet to microsoft works word processor.


try copy from internet and then use edit>paste special.....use unformatted text or text only....see the result...

May 12, 2009 | Dell Inspiron 531s Desktop Computer

1 Answer

I dont have win xp svc pack 2 cd and i wanted to install my windows components back


Download servicepack 3.
Be sure not to have Norton installed.
If so use special Norton removal from symantec.
Never use Norton with SP3. Get Avast for instance.

Apr 17, 2009 | Microsoft Windows XP Home Edition

2 Answers

Help


Wireless router installation

Apr 19, 2008 | Linksys BEFSR41 Cable/DSL Router W/4 Port...

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rotel Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5700 Answers

The Knight
The Knight

Level 3 Expert

76376 Answers

Are you a Rotel Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...