Question about Frigidaire Ovens
The communication between the oven user interface and the touch panel cannot be initiated.
Posted on Nov 06, 2018
Frigidaire / Westinghouse / Tappan / Gibson
Oven Fault Codes
Display Condition Remedy
F0 & F1 EOC failure Replace EOC
F2 Oven over heat Defective Sensor or EOC
F3 Oven Sensor Open Replace Sensor
F4 Shorted wire or Sensor locate short and correct it
F5 EOC failure Replace EOC
F6 EOC failure Replace EOC
F7 EOC failure Replace EOC
If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61
Posted on May 17, 2009
HI. the F-1 code represent s a failed oven control board. you will need to replace the clock or, oven control in this case. it is damaged.
Ok, the F-3 represents a failed oven temp sensor device. Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor (RTD) if wiring is ok.
Posted on Aug 01, 2009
The E1- F5 error is a door lock error.
The control (TIMER) has likely failed in this instance - BUT...
Sometimes when you disconnect power to a range and reconnect it the electronic range control gets confused.
You should disconnect power again for 15 seconds and reconnect and see if that helps.
If it doesn't cure the E1- F5 error hold the bake button in until E0- F2 appears in the display.
This is the error for a stuck button on the keypad and is the way to clear the memory of the electronic range control.
Sometimes these work, but if the control has failed it won't make any difference.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
Posted on Sep 23, 2010
Tips for a great answer:
Sep 28, 2018 | Frigidaire Ovens
Hello friend, thank you for your post!
I see you have a Frigidaire wall oven and you are searching for error codes. Do you have a specific error code that your oven is giving you? Also, could I get your model number please? With that additional information I would be able to provide you more assistance. I look forward to hearing from you. -Matt
Aug 02, 2014 | Frigidaire 24" Built-in Single Electric...
Error Code E90 typically means that you have a faulty motor door latch, lock motor assembly, door light switch or a defective EOC. You would need this to be diagnosed by a professional technician in order to properly repair the wall oven.
Sep 25, 2012 | Frigidaire 30" Built-In Single Electric...
Aug 30, 2011 | Frigidaire FGB24L2A Gas Single Oven
Jul 07, 2017 | Ovens
Jun 05, 2010 | Frigidaire 24" Built-in Single Electric...
Sep 12, 2009 | Frigidaire 30" Self-Cleaning Freestanding...
May 17, 2009 | Frigidaire 30 in. Electric Gallery Series...
Mar 17, 2009 | Frigidaire 24" Built-In Single Gas Wall...
219 people viewed this question
Usually answered in minutes!