Konika Minolta bizhub 165e Maintenance Call M2 Call Service Machine Trouble Service Code C2558

Replace the drum and developer units

question too vague.
make? model?
example:
Re: Konika Minolta BizHub 163 - Error Code? M2
• To display the count of the supplies life counter.
When the counter reaches "0", life 1 will be detected and maintenance call M2 will appear.
The initial value is 40,000, and the countdown system is used.
Use Setting/Procedure
• To clear the count, use [CLEAR DATA] of the Service Mode.

http://www.copytechnet.com/forums/konica-minolta/62595-konika-minolta-bizhub-163-error-code-m2.html

You need to go into the service mode and then reset the supplies life counter.

machine trouble sevice call [c2558] wat a problam in konica minolta bizhub 164 printer

help me my konico minolta bizhub 184/164 error (C2558)
my mail id - [email protected]

konika minolta184 ineed reset pogram call m2

I Have a Konika Minolta bizhub 211. I had been trying this solution for repairing m2 call. but the code is appear till now. anyone help me. please give me solution step by step.
Thanks

Code M2 means your photocopier machine require maintenance.In maintenance some old parts of your machine will be replaced with the new one and all this will be performed by technical services representative.

tis error means abnormal tonder density in the balck image unit take the blacke image unit out and shake it while holding it level and put it back in the machine to reset the error code leave the machine on and open then close the front door