Question about Frigidaire Kitchen Ranges

1 Answer

E31 Error Code on Frigidaire Gallery 30" Self-Cleaning Freestanding Electric Range. I got this and checked the oven probe and the line reading was correct. It still beeps.

Got E21 and replaced the UIB and the controller. Thought it was all OK but after an hour of the stovetop working, it went back to E31. What's going on? I need this unit to work in our cafe!

Posted by Michael L Higgins on

Ad

1 Answer

Chris Huff

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Frigidaire Master
  • 6,289 Answers


The F31 error code means that the control board detects the oven temperature probe circuit is shorted. If the sensor tests good, then you could have a bad control board or a short in the wiring.

Posted on Oct 19, 2018

  • Michael L Higgins
    Michael L Higgins Oct 19, 2018

    As the control board has been replaced because the sensor tested out as good, then there must be a short in the wiring. I'll check that out again. Thanks. I'll let you know.

×

Ad

5 Related Answers

Anonymous

  • 8 Answers

SOURCE: Unlocking Oven controls

According to the manufacturer's website you should only need to Press and hold the "Lock" key for 5 seconds. A single tone will sound and the "Loc" will disappear off the display.

This is the link to Whilpool's website and to the manual.
http://shared.whirlpoolcorp.com/assets/pdfs/literature/Use%20and%20Care%20Guide%20-%209761079.pdf

Thank you
Agent Matt
Go Ahead. Use Us.

Posted on Apr 07, 2008

Ad

SOURCE: Frigidaire Gallery Self Cleaning Oven

F1 code on frigidaire is bad EOC (clock) Try shutting breaker off 20-30mins see if it resets itself.

Posted on Jul 12, 2008

TheMobilian

Dan Webster

  • 8220 Answers

SOURCE: self cleaning oven error code FSEO

Probably a bad door lock solenoid. That is some kind of door lock problem. Trouble is they are not all the same. This training manual shows locations of model number. Perhaps if you post that I might can come up with a tech sheet and you would get a better answer. see page 4

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Posted on Apr 11, 2010

Testimonial: "was surprised at such a quick response...needed additional information to provide a better solution...very grateful for the assistance"

Anonymous

  • 1 Answer

SOURCE: Frigidaire Gallery Series ES340 ceramic-top range:

The manual is missing a step. After pressing Clean or Quick clean you need to press the ^ button once.

Posted on Sep 05, 2010

chrispolkele

Electrolux

  • 4342 Answers

Our people make the difference

    Verified Fixya Pro

    SOURCE: how do i fix the light socket to my Frigidaire Gallery 30" Self-Cleaning Freestanding Gas Convection Range

    Hi michell51238 - From what you are describing it sounds like the range may possibly have a faulty light switch or wiring failure that only a professional can repair. I personally recommend consulting a certified technician for a proper diagnosis and to move forward accurately.

    Posted on Feb 25, 2013

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    How to clear error 2 on a fully automatic toshiba washing machine


    Here's a list of most Toshiba washers error codes;

    E1: Water doesn't drain in time or not at all
    E21: Lid open
    E23: Lid not locking
    E31: Load imbalance
    E32: Check E1 and/or E31
    E5: No water coming in

    https://www.skypesupports.com/

    May 30, 2018 | Washing Machines

    4 Answers

    GE Stove tope range not working


    If the phenomenon is intermittent, and you get it going and coming as you restart the oven, then it is likely a bad wiring or a bad connection.
    Ensure first that the circuit breaker is ok and well in place, then proceed testing wirings.
    Check connectors to buners, hobs, and controls panel.
    If all wirings and connections are OK, the what reamins is a faulty control panel or a fault on some of the knob controls.

    Sep 04, 2008 | Kitchen Ranges

    2 Answers

    My Toshiba washing machine model AW-A800MBK This have 4 LED lights, Now machine running some time drain and showing LED 2,3 glowing and then machine stop, What is the problem with this machine?


    Toshiba top load washers have standard error codes. Depending on the display (2 or 3 digits depending on the model) it will either show E21 (or E23) or alternate E2 and -1 (or E2 and -3). Here's a list of most Toshiba washers error codes;

    E1: Water doesn't drain in time or not at all
    E21: Lid open
    E23: Lid not locking
    E31: Load imbalance
    E32: Check E1 and/or E31
    E5: No water coming in

    You can try resetting to factory default by following the procedure: Power OFF, then pressing and holding the Super Spin Dry button, press power ON and it should beep 3 times. E2 error code aw 8990st toshiba wash Washing Machines

    Mar 13, 2018 | Washing Machines

    1 Answer

    Toshiba washing machine When I push on the error E7-4 shows and then it turns off what is E7-4 error ?


    Is your machine either the Toshiba AW-SD120SM or AW-SD120SS?
    If it is I checked the manual and the error code you mentioned is not listed in their operators manual. On page 35 of the manual there is a message that says "As for information display beyond the above-mentioned details, or the above-mentioned solutions do not work, please disconnect the power plug and contact technicians for repair."
    The only codes mentioned are: E1 E21 E23 E31 E32 E5 A ans F

    Jul 31, 2016 | Washing Machines

    1 Answer

    How do I troubleshoot E21 and E39 Codes?


    I appreciate your inquiry, Bill Payer!

    I understand that your Electrolux range is displaying error codes "E21" and "E39" and you are waiting for a part to become available to change. Based off the error codes "E21" stands for key sensor for cook place two which means a potential issue with the left board. "E39" stands for incorrect configuration. To configure your cooktop you would need to press and hold the "Warm" key, then press right front "Power" key until it beeps. Then press left front key and the configuration should start. If that does not help your situation I would suggest having a professional out for proper diagnosis. This will help to avoid any unnecessary part purchases. Best of luck! -Matt

    Dec 30, 2014 | Electrolux Kitchen Ranges

    1 Answer

    Why do I get E 21 message on my Electrolux slide in range Model EW301S6CjSc which has frozen the stove top


    Thank you for your post, Sandra Gee!

    Based off the information you have provided an "E21" error code is displaying on your Electrolux range. Typically, an "E21" stands for a communication failure between the EOC (Electronic Oven Control) and the ESEC (Electronic Surface Element Control). I would suggest performing a reset on your range and you can do that by disconnecting the power from it for ten minutes. The best way to disconnect power is to flip the household circuit breaker. If you continue to have an issue with an "E21" error code I would have a professional technician perform a diagnosis on your range to help repair it properly. Hope this is helpful. -Matt

    Dec 25, 2014 | Electrolux Kitchen Ranges

    1 Answer

    Electrolux e21


    Thank you for your post, friend!

    I understand that your Electrolux cooktop is flashing an "E21" error code. Based off the information I was able to look up it sounds like a possible issue within the left board. I would suggest seeking assistance from a technician for proper repair because some of these intricate parts do require precision and patience. Therefore when replacing the exchange of electrical components or removing them from your appliance, I always suggest seeking professional assistance. -Matt

    Sep 28, 2014 | Electrolux 30" Induction Cooktop

    1 Answer

    E2 error code aw-8990st toshiba wash


    Toshiba top load washers have standard error codes. Depending on the display (2 or 3 digits depending on the model) it will either show E21 (or E23) or alternate E2 and -1 (or E2 and -3). Here's a list of most Toshiba washers error codes;

    E1: Water doesn't drain in time or not at all
    E21: Lid open
    E23: Lid not locking
    E31: Load imbalance
    E32: Check E1 and/or E31
    E5: No water coming in

    You can try resetting to factory default by following the procedure: Power OFF, then pressing and holding the Super Spin Dry button, press power ON and it should beep 3 times.

    Hope this helps

    Jan 25, 2014 | Washing Machines

    1 Answer

    Have a frigidaire es510, i am getting an f20 err when I amtrying to use the stove


    Hi ,

    This is the code for a communication failure between EOC (ELECTRONIC OVEN CONTROL) & ESEC system
    1. Test harness/connections P4 (EOC) & P11 (Surface Element Control Board)
    2. If harness checks O.K. failure can be caused by faulty UIB, Surface Element Control Board or EOC.
    Check on the back of the stove there should be an envelope attached to it that has service paperwork in it with diagrams
    It will most likely need a new oven control very easy to replace just remember to remove the power to the unit before you work on it.
    Please contact me if you have any more questions.

    Mar 24, 2008 | Kitchen Ranges

    3 Answers

    Oven proof ???


    Hi yes all stone ware is oven proof so you should have no problems using them just remember they stay hotter to the touch for longer than other oven products they stay hotter for longer once their out of the oven let me know if you need further assistance ok

    Mar 19, 2008 | Crock Pots & Slow Cookers

    Not finding what you are looking for?
    Kitchen Ranges Logo

    Related Topics:

    105 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Frigidaire Kitchen Ranges Experts

    Ismael Rodriguez...

    Level 2 Expert

    184 Answers

    Paul Carew

    Level 3 Expert

    3512 Answers

    Marvin
    Marvin

    Level 3 Expert

    85239 Answers

    Are you a Frigidaire Kitchen Range Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...