Question about Nautica Watches
SOURCE: Leather wrist strap
I would scrap the strap - the odours are caused by the tanning chemicals getting wet. Retain the fastening and purchase half a meter of nylon ribbon loop it through the case pegs on one side glue them together and pierce for buckle holes. On the buckle side loop it through both case peg and buckle and fold and glue. You have a choice of colour and it cost only fraction of a new leather one- also you will have enough left to make two straps
Posted on Sep 12, 2007
SOURCE: Adjusting the strap
Most clasps have a series of small holes drilled in them, and the end of the strap is held in by a small, spring-loaded bar whose ends are seated in one set of holes. Take the end of a small paperclip, or a large needle, and use it to depress the spring-loaded pin. You can then carefully slide it to another set of holes to make the band smaller. Don't let the ends of the pin slide all the way out of the clasp, or it might shoot off into space.
Posted on Jan 22, 2008
If you go to the web site www.nauticawatches.com and select "service center" you will be able to see all the service centers. Choose your nearest and ask them.
Posted on Jan 26, 2010
Testimonial: "THANK YOU"
Tips for a great answer:
Nov 15, 2014 | Nautica Watches
Aug 18, 2013 | Cerruti 1881 Watch
Aug 09, 2012 | Watches
Jun 24, 2011 | Nautica NST Chronograph N14555G Watch for...
Dec 31, 2010 | Nautica A23095 Watch for Men
Nov 25, 2010 | Nautica A31504 Watch
Apr 12, 2010 | Nautica Nsr 01 Black Dial with Red Rubber...
83 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: