My viewsonic N3235w just keeps running through the channels like it's on scan. How do I stop it

Do you mean the Viewsonic remote control RC00136P? If so, you will find the directions to use the remote in the manual for one of the Viewsonic TVs that came with that remote. One of those TVs is the N3235W. ManualsLib has a few versions of the manual here: https://www.manualslib.com/products/Viewsonic-N3235w-32-Lcd-Tv-59932.html . The section on using the remote starts on page 23, https://www.manualslib.com/manual/266620/Viewsonic-Vs11770-2m.html?page=28#manual

I hope this helps.

Cindy Wells

Davey, link to your printable manual below.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

http://www.hdtvsolutions.com/pdf/n3235w-1_ug_eng.pdf


https://www.google.ca/url?sa=t&rct=j&q=&esrc=s&source=web&cd=4&cad=rja&uact=8&ved=0ahUKEwjjyNvf3JvLAhVMmIMKHcHfBR8QFgguMAM&url=https%3A%2F%2Fwww.manualowl.com%2Fp%2FViewSonic%2FN3235w%2FManual%2F20276&usg=AFQjCNFnV6ukNRtLNd1w-7i1R8r4_-ebjA

https://www.google.ca/url?sa=t&rct=j&q=&esrc=s&source=web&cd=5&cad=rja&uact=8&ved=0ahUKEwjjyNvf3JvLAhVMmIMKHcHfBR8QFggzMAQ&url=http%3A%2F%2Ftv.manualsonline.com%2Fmanuals%2Fmfg%2Fviewsonic%2Fn3235w.html&usg=AFQjCNFH8GJb1Ro6BX9fRSs_zR3nMd_TeA

The first thing to try is to see if a button is stuck on the remote or on the TV.
Remove the batteries on the remote and see if that helps. If it fixes the problem, you'll need to replace the remote.
If that doesn't help, look close at the buttons on the TV to see if one is jammed on. If changing channels continually up, then check the channel up button on the TV, if down then check the down button.
Worst case, you might have to take the back off the TV and unplug the cable feeding the external button panel on the TV and only use the Remote (for safety, rememeber to unplug the TV while doing any work on it).

Depends what you mean by no video.
If the screen is white and washed out, it could be your T-Con board.
If the screen is black, turn the lights off in the room and look for any glow from the screen. If you see glowing, then the backlight is working and your problem is the video/main board.
Shine a flashlight or other strong light on the screen to see if you see any faint images in the screen, if you see images, then your backlight circuit is gone.

Set your Sony Media player to output only in 1080i or 720P output mode. If that doen't work and if your Sony supports Component hook-up, use that instead (Blue, Green, Red Video and seperate Audio).

I can't find a Viewsonic N3235W3M. However the N3235W and the N3235W-M use the RC00136P remote. This remote is available from several sites: http://www.electronicadventure.us/Merchant2/merchant.mvc?Screen=PROD&Product_Code=A-00008148&Category_Code=VRC2 and http://www.remotecontrolscenter.com/viewsonic/a-00008148.html . A replacement remote is available from remotes.com here: http://remotes.com/store/viewsonic/n3235w.html .

I hope this helps.

Cindy Wells

i understood your problem.....it cause due to interference between different phase of polarised light pulses....

Other problem may be due to your video input check your connection and settings....

otherwise you should check for your digital video processor chip..

Thank you for giving me opportunity to solve your problem.

please give me your Ratings!!

I've got the exact same problem with the same tv.. amber light, won't turn on.

check the power and monitor cables if they're firmly connected.