Question about Samson Audio Players & Recorders

Open Question

Hi My Samson Resolv 5in monitor has a loud humm when not connected to any speakers.

Posted by Anonymous on

Ad

3 Related Answers

Anonymous

  • 2 Answers

SOURCE: Samson Resolv 65a monitor repair

Its prob a dry solder joint problem.

http://www.gearslutz.com/board/low-end-theory/314545-samson-rubicon-r5a-problem.html

Posted on Sep 16, 2010

Ad
jdvillanueva

Jdvillanueva

  • 2098 Answers

SOURCE: dc voltage at the

Hi mastervideo,
If you are going to get the voltages reading of the speaker terminal, set your multimeter to AC not in DC. You will get a maximum 12vac depends upon the strength of the input signal and your volume control. The reading will flactuate depend upon the input signal.
Hope I helped you.
Have a nice day!
Thanks for using Fixya.

Posted on Apr 05, 2011

Ad
paulio150

Paul Smith

  • 1 Answer

SOURCE: Hi There the fuse just blew in one of my Samson

Hi , where is the fuse in my resolve 65a ? i just cant find it.

Posted on May 03, 2014

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a transformer for my resolv 65a monitor


Are you an experienced tech? In most cases (unless there is a defect in manufacturing) transformers are not a common cause for failure. If it blows the fuse disconnect the secondaries and see if it still blows the fuse. If it does then the transformer is likely the cause, if the fuse doesn't blow then the problem is elsewhere. If you have 120vac at the primary and nothing(or very low) at the secondary(s) then the transformer could also be at fault. If you have done this already and narrowed it down to the transformer, sorry I cannot help. I used service Samson but no longer am able to get parts. Good luck!

Jan 04, 2015 | Samson Audio Resolv 65a Active Studio...

1 Answer

Samson Resolv 40A,no sound, power light on cables good.


Your best bet is to take them to an authorized repair center. You may also want to talk to Samson directly. Here is their support link-
Support SamsonTech

Mar 19, 2013 | Samson Resolv 40A Monitor Speakers

1 Answer

Very little output from tweeters Samson Resolv A6


same issue here, my 6 inch woofer is good but the tweeter is not producing sound, i opened the box myself, theres not signal going to my tweeter, how can i check to see if its a wiring or other issues to diagnose myself? heres some pics

Aug 10, 2012 | Audio Players & Recorders

1 Answer

65a Resolv studio monitors. The left one just blew out -- maybe. The blue LED stays dim, as though the monitor has been sleeping. When I power off the monitor, the speaker gives a loud pop, and the cone...


You are getting DC offset voltage on one of your amplifiers that is the reason the speaker pushes out and you might be hearing a humming noise too. Do not turn on the speakers till you get it fixed or else you would end up burning the speaker voice coil too.The dim blue LED is also an indication of a short circuit in the output stage.
Your left amplifier needs a output chip (IC ) replacement. You will need professional help to do that. Will cost you about 20$ plus service charges.

Jun 27, 2011 | Samson Resolv 65a Main / Stereo Speaker

1 Answer

Tweeter is cutting in and out


need to open up speaker and check connections on tweeter. Check closely on tiny wires from magnet(voice coil) to paper cone

Jan 04, 2011 | Samson Resolv 65a Main / Stereo Speaker

2 Answers

Hi There the fuse just blew in one of my Samson


Hi there
To answer your question;
If it is not indicated near the fuse holder then look closely at the metal end caps of the fuse.
The value will be written on one of them,
It may look like 2A/250v for 2amps.

Hope this help
Cheers

Jun 14, 2010 | Samson Resolv 65a Main / Stereo Speaker

1 Answer

My tweeters are blown on my Samson Resolve 65a monitors...anyone know what I should get (and where) to replace 'em?


It might tell you on the back of the tweeter what rating they are. I should do a webserch for Samson spares and see what it comes up with.

Feb 02, 2010 | Samson Resolv 65a Main / Stereo Speaker

1 Answer

Samson 65a monitor speaker


If its not to big find a neostick or similar sintetic glue,piece of medicine bandage and black (if speaker is black) mat spray.First put some glue around the rip wait for 10 min and then put the bandage on it.After that again 10 min of waiting and new layer of glue on the bandage.Let it 24 hours for glue to dry an then respray it.If you can do it from the back side its better and repair is almost invisible.

Feb 29, 2008 | Samson Resolv Sub88 Subwoofer

1 Answer

Samson Resolv 65a monitor repair


Its prob a dry solder joint problem.

http://www.gearslutz.com/board/low-end-theory/314545-samson-rubicon-r5a-problem.html

Jan 14, 2008 | Samson Resolv 65a Main / Stereo Speaker

3 Answers

Samson Resolv 65a Speaker - No Power!


There's a fuse input just underneith the mains input plug.A small screwdriver will open the small latch.You can get new fuses at Maplins.

Jan 07, 2008 | Samson Resolv 65a Main / Stereo Speaker

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samson Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5700 Answers

The Knight
The Knight

Level 3 Expert

76466 Answers

ray gallant

Level 3 Expert

71004 Answers

Are you a Samson Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...